The Cobalt Smart-Heat Electric embodies the core characteristics of the Bromic Heating range, stripping away the premium perks of the other proven performers to produce an entry-level Smart-Heater. This electric heater sacrifices the evenly diffused heat created by the unique element screens of the Platinum and Tungsten ranges while retaining the outright heating power that has secured Bromic Heating's position as the industry-leader in infrared radiant heating.
2 ultra-durable quartz elements emit a soft red glow so that your operation's ambience doesn't suffer, while their combined 4000W of power is fully maximized thanks to an anodized rear reflector that directs lost infrared energy back to the target for optimum performance and efficiency. This electric heater is made of corrosion-resistant 304 stainless steel that not only ensures reliable heating for years to come, but also features a subtle black finish on the top and sides for a less industrial presentation. Its minimal vertical clearance requirements, a variety of mounting options, and the precise directional coverage that's achieved through simple bracket adjustment give you incredible installation flexibility for a variety of enclosed outdoor areas. Optional Wireless ON/OFF control switch unit allows the power output of the heater to be turned on/off, impulsive or timer controlled up to 8 hours, 59 minutes and 59 seconds. The wireless control is enclosed in a protective box and can be used with 110 - 230VAC supply voltages. Can control two 3000W heaters at 230VAC (1500W at 110VAC). Includes 4-channel remote. Read the Bromic On/Off Manual for more information. Electric heaters also have the option for a Wireless Dimmer control switch, allowing customers unprecedented control over heating output. This unit allows the power output of a heater to be adjusted for perfect comfort, with the ability to adjust multiple units in unison with a single remote. Each Tungsten Electric Smart-Heat Wireless Dimmer Control can manage up to 6500W of heating and can be used in 120VAC, 208VAC and 240VAC applications. Enclosed within an IP54-rated protective casing, a 7-channel transmitter allows users to dim or brighten their heaters at the touch of a button, offering customizable comfort and exceptional reliability. Read the Bromic Dimmer Manual for more information.
Additional product details may be found by reading the Bromic Cobalt Spec Sheet. This helpful manual includes technical specifications, installation/mounting recommendations, a pre-install checklist, maintenance & care info and the manufacturer warranty.
- Heats approximately 120 sq. ft.
- 4,000 Watts
- Full Stainless Steel Construction
- Wind resistant to 8 mph
- 230-240v / 16.6A Power Connection
- One year manufacturer's warranty
- Surface ceiling/wall adjustable mount included
- Water/Splash Resistant
Bromic recommends the following:
Always install with the corresponding Bromic heat shield and clean according to Bromic instructions. Clean the heater weekly during regular use and at least monthly when not in use. In a salt-air environment, such as near the ocean, cleaning is recommended more frequently. Heaters must not be cleaned with cleaning products that are combustible or corrosive. Over prolonged use may cause slight discoloration of painted surfaces. This is normal and does not effect the operation of the appliance. Bromic uses specialized high temperature paints and as such re-painting should not be attempted. Replacement parts can be purchased to restore the heater to its original appearance from Bromic Pty Ltd. (Refer to parts list in Bromic Manual).
Bromic outdoor radiant heaters require regular servicing to maintain efficient operation. The heaters are used on a cyclical basis however are exposed to the external elements continuously (both during periods of use and whilst remaining idle). Regular servicing is therefore required to ensure trouble free operation. All maintenance should be carried out ONLY by authorized service personnel. Servicing is recommended at the commencement of each winter season and more frequently in adverse conditions. Please refer to the Bromic Manual for the standard Bromic servicing instructions.
- Width: 44"
- Depth: 8.5"
- Height: 3.5"
- Weight (lbs.): 20
Assembly: Minor assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.
If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.
Bromic Pty Limited ('Bromic') warrants to the original purchaser ('the Purchaser') of products supplied by Bromic Heating ('the Goods') that the Goods will be free from defects and/or faults in materials and/or workmanship for twelve (12) months from the date of Bromic invoice.