zoom inClick to Zoom
with Free Shipping
white glove delivery

White Glove Delivery Available

How does it work? 
with Free Shipping

Shopping for a Client?
Unlock your trade benefits

WarrantyCovered by the Fire Pit Art warranty.

Contact us for assistance, a free design consultation or to order by phone.

About this Item

Highlights

  • Main image shown with Standard Iron-Oxide Patina finish.
  • Wood or gas burning fire pit hand-crafted of 1/4 in. steel.
  • Fire pit can be left outside in all weather conditions.
  • Interior has a high temperature resistant coating and rain drain.

Specifications

BTUs200000 
ShapeRound 
Width36.00 in
Height23.00 in
Length36.00 in
Weight185.00 lbs
Burner Size24.00 in
Hidden TankNo 
Hose Length18.00 in
Heating FuelLiquid Propane, Natural Gas, Wood Burning 
Ignition TypeMatch Lit 
Burner Pan Size24.00 in
Country of OriginUSA 
Fire Pit MaterialCarbon Steel 
Lava Rock/Fireglass Weight60.00 lbs
Lava Rock/Fireglass IncludedYes 

Description

Each Fire Pit Art Beachcomber 36" Fire Pit exhibits the artistry of its craftsman. Heavy gauge, one quarter inch carbon steel is fabricated into a hand-cut fire pit which is impervious to weather and can be kept outdoors all year long. The spacious fire bowl is lined with a high temperature-proof coating, has a center rain drain and is 16" deep. The base elevates the bowl to a height that can be viewed from any side or angle and each base is outfitted with a hand-numbered brass plaque from the artist. This fire pit oxidizes over time to a permanent, rich and dark finish. This Fire Pit Art original Beachcomber design with Conch, Nautilus and Scallop sea shells is reminiscent of endless summer day's beachcombing for wonderful treasures of the sea. This gentle soothing design compliments any landscape either by the sea or far away.

Finished with a Standard Iron-Oxide Patina.

Please be aware of any local ordinances that may restrict or govern the use of this product prior to purchasing.

Options Available:

  • Wood Burning - Does not include lava rock or media grate.
  • Natural Gas or Liquid Propane Gas burner kit - Comes complete with fire pit, 200K BTU HPC stainless steel burner, Lava Rock, Flex Line Kit and Plate. Lava rocks included.
  • Electric Start - All Weather Electronic Ignition System includes 24 volt AC Transformer, Fire Module, Heat Shield and Install Instructions. Lava rocks included.

California Resident Proposition 65 Information

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov/

At A Glance

  • Assembly Requiredassembly required
  • Made In USAMade in USA
  • Natural Gasnatural gas heating fuel
  • Wood Burningwood burning heating fuel
  • Liquid Propaneliquid propane heating fuel

Product Protection

You do not need to do anything to the carbon steel to maintain it's finish. If you would like to smooth out the weathered surfaces, you can use a Scotch Brite pad to gently rub the steel. This will cause some of the rust barrier to break off and fall to the ground. Be sure to thoroughly clean the ground surface after this process. You can use water to clean the surfaces after this process.

Do not get water into any of the burner components. Water in the burner components can cause dangerous back pressure. If you think there is water in the burner components, call a licensed technician to check the burner before use.

Fire Pit with Gas Option
Fire pits should be inspected before initial use and inspected and cleaned at least annually by a qualified field service person. Periodically remove the logs, glass or lava rock and examine the burner. If dirty, clean with a soft brush. Also, examine the area around the Propane/Air Mixer. Any dirt or lint in this area should be removed. This will ensure long life and trouble free operation. When the fire pit is put back in service, check the burner flame patterns; it is imperative that the burner flame characteristics are steady, not lifting or floating. Periodically check the hose connecting the LP gas cylinder to ensure it is not damaged in any way. While the fire pit is not in use, it should be covered to protect it from weather and other adverse elements. Not protecting the fire pit could result in a void of the warranty.

Carbon (soot) may build up on the surfaces of the logs with heavy use. This is more likely to occur when using LP gas. The soot should be cleaned off the surface of the logs periodically to prevent excessive buildup. To clean the logs, be sure the fire is out, the gas supply is turned off and the logs are cool to the touch. The soot can then be brushed off with a dry bristle brush or cloth. Logs can be damaged if mishandled. Dispose of soot and cleaning materials properly. Keep away from clothing, pets and outdoor furniture.