Categories

  • Kingsley Bate Tivoli Sectional Square Corner Chair Replacement Cushion
  • Kingsley Bate Tivoli Sectional Square Corner Chair Replacement Cushion - img.  2
  • Kingsley Bate Tivoli Sectional Square Corner Chair Replacement Cushion - img.  3

Tivoli Sectional Square Corner Chair Replacement Cushion by Kingsley Bate

Item#:
KB-CUS136
$595.00 Our Price: $536.00
(You save $59.00)
Qty.
  • For a Free Design Consultation or to Order by Phone
    Call: 1-866-360-8325
  • Showroom HoursShowroom Hours: Mon - Sat: 10a - 6p; Sun: 12p - 5p ET

Product Description

These replacement cushions are made by Kingsley Bate and are constructed to fit the Kingsley Bate Tivoli Sectional Square Corner Chair (Item #TL36). These comfortable all-weather cushions are filled with either urethane foam wrapped with polyester fiber or with blow-filled polyester fiber. All cushions are available with Sunbrella Fabrics. Cushions are sewn with a lock-stitch sewing method for superior seam strength and tear resistance. Color coordinated zippers are standard. Replacement cushions are made-to-order and all sales are final. For assistance determining the correct cushion, please contact our showroom.

Over 65 solution-dyed acrylic fabrics are available for the all-weather seating cushion. Customer's Own Material (COM) accepted. Please inquire for additional details.

Review the Kingsley Bate Catalog for the complete Kingsley Bate outdoor furnishings and accessories. Questions regarding furniture cleaning and tips can be found in the Kingsley Bate Care and Maintenance Sheet. All questions related to warranty information can be answered by reviewing the Kingsley Bate Warranty.

Winter Care
Kingsley Bate recommends that furniture with stainless steel accents be stored for the winter in climates exposed to snow and freezing temperatures. Furniture must be stored in an upright position to allow for proper water drainage. Storing furniture upside-down may cause water to accumulate and freeze inside the frame, causing structural damage. Always thoroughly clean your furniture before placing in storage. The best place to store your furniture is a dry garage, garden shed, or basement.

Cleaning Stainless Steel
The recommended method for cleaning depends on the type of finish:

For the Standard Stainless Steel Finish:
Using fresh water, rinse the frame thoroughly at a high hose pressure. Be careful to avoid any teak details on the furniture as the high pressure can erode the surface of the timber.

For more thorough cleaning, wash the stainless steel with mild detergent and warm water using a soft cloth or sponge. Always wipe with the directional grain of the steel, not across it. After washing, rinse with fresh water and dry thoroughly.

For finger prints or smudges, you may wish to use a stainless steel cleaner. Always read the manufacturer's instructions carefully before applying a stainless steel cleaning product. For more stubborn cleaning or brown surface spots, follow the instructions above, replacing the cloth or sponge with a fine grit non-metallic abrasive pad such as Scotch-Brite. Never use abrasive cleaners, steel wool pads, highly abrasive cloths, or an industrial pressure washer.

For the Electropolished Standard Stainless Steel Finish:
Using fresh water, rinse the frame thoroughly at a high hose pressure. Be careful to avoid any teak details on the furniture as the high pressure can erode the surface of the timber.

For more thorough cleaning, wash the stainless steel with mild detergent and warm water using a soft cloth or sponge. After washing, rinse with fresh water and dry thoroughly.

For finger prints, smudges, or brown surface spots, you may wish to use a stainless steel cleaner. Always read the manufacturer's instructions carefully before applying a cleaning product. Do not use any pads, brushes or abrasive materials on the electropolished surface. Extra care should be used to avoid scratching the finish, as doing so can make the steel more susceptible to corrosion.

To further inhibit corrosion and retard the effects of weather and oxidation on stainless steel, we recommend applying Kingsley Bate Anti-Corrosion Wax at least once a year. The wax may be used on both our standard and electropolished finishes, but should not be used as a substitute for electropolished steel if the furniture will be in contact with salt-air or chlorinated pool water.

Cleaning Cushions
Kingsley Bate cushions are made with either Sunbrella or Outdura fabrics, a 100% solution-dyed acrylic. The fabric should be cleaned regularly before environmental deposits such as dirt, etc., are allowed to accumulate and become embedded.

Kingsley Bate strongly recommends that you do not remove the fill from your cushions when cleaning the cushion fabric. Instead, clean the cushions with the fill in place. Most cushions are 'stuffed' using specialized machinery, and it is not always possible to re-stuff the cushions by hand and achieve a professional, finished appearance.

To clean the fabric, simply brush off any loose dirt, and then clean briskly with a sponge using fresh water and a mild natural soap (Woolite is acceptable). Water temperature should be no more than 100 degree F (37 degree C), as acrylic fiber is heat sensitive at high temperatures. Do not subject the fabric to excessive heat as it will shrink. Do not steam press, iron, or dry in electric or gas dryers.

Sunbrella and Outdura Fabrics are treated with a fluorocarbon finish that acts as a sealant, making it resistant to water and stains. If you use liquid detergent instead of a natural soap to clean your cushions, it may be necessary to reapply the water repellent treatment to the fabric. We recommend using 303 Hi Tech Fabric Guard or a similar product.

If your cushion becomes saturated with water, unzip the cushion and stand it on its edge in a dry, sunny location. The zipper-side should be facing down to allow the water to drain through the opening. Cushions will typically dry in 24-48 hours depending on the level of saturation and the weather conditions during the drying process.

When cushions are not being used, you may also wish to stand them on edge within the furniture frame. Doing so will reduce the surface area exposed to the rain and allow for faster drying.

Avoid putting the fabric in direct contact with oil-based products, which may cause the fabric to age more rapidly. If direct contact with an oil-based product occurs, clean the fabric promptly.

Furniture Covers
Furniture covers should be cleaned regularly before environmental deposits (dirt, etc.) are allowed to accumulate and become embedded in the fabric. We recommend spot cleaning furniture covers. Start by brushing off any loose dirt/debris, then clean using a sponge, fresh water, and mild soap.
  • Made specifically tailored to fit this size furniture frame
  • Seat Height: 15"
  • Width: 35"
  • Depth: 35"
  • Height: 25.5"
  • Weight (lbs.): 60
Shipping Method: Freight (for freight terms and services click Shipping Info)
Assembly: No assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.

If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.

Warranty Information

With proper use and care, we are confident that all Kingsley-Bate products will provide you with years of trouble-free enjoyment. Your furniture comes with a limited warranty against manufacturer's defects. Standard warranty periods for each category of furniture are provided below.

Teak Furniture
- 5 year warranty for residential applications
- 3 year warranty for commercial applications
- 1 year warranty for glass table tops, cushions, slings, and pillows

Stainless Steel Furniture
- 3 year warranty for residential or commercial applications
- 1 year warranty for slings

Woven Furniture
- 3 year warranty for residential or commercial applications
- 1 year warranty for glass table tops, cushions, and pillows

Umbrellas/Bases
- 1 year umbrella warranty for residential or commercial applications
- 1 year umbrella base warranty for residential or commercial applications (corrosion not covered)

Other Details

Category:
Cushions
Type:
Deep Seating
Brand:
Kingsley Bate
id:
kingsley-bate-tivoli-sectional-square-corner-chair-replacement-cushion
Quick Ship Icon:
No
More Colors Icon:
Yes
Recycle Icon:
No
Swatch Request Form:
Yes
Free Shipping Icon:
Yes
Manufacturer Part Number:
CUS136 (Fits Frame TL36)
Category Excerpt:
Replacement Cushion for Kingsley-Bate Tivoli Sectional Square Corner Chair - TL36
Category:
Sectionals
Lead-Time:
Quick Ship cushion(s) ship 1 - 2 weeks, others ship 4 - 5 weeks.
Yahoo Google Shopping ID:
kingsley-bate-tivoli-sect-sq-corner-chair-rcushion
Yahoo Bing Shopping ID:
kingsley-bate-tivoli-sect-sq-corner-chair-rcushion
Google Shopping MPN:
CUS136 (Fits Frame TL36)
Google Shopping GTIN:
Google Shopping Promotion ID:
Google Shopping Custom_Label_0:
Tivoli
Google Shopping Custom_Label_1:
Google Shopping shipping_label:
FREE
Yahoo Google Taxonomy:
Home & Garden > Decor > Chair & Sofa Cushions
Blacklist:
FALSE
Google Shopping Availability:
In Stock
Google Shopping Condition:
NEW
Google Shopping Identifer_exists:
TRUE
X

Fabric Swatch Request

Click to select the desired swatches. Once you have made your selection, click the green button below and proceed through check-out. You will not be charged. Five swatches per order. To request more, please call our showroom at 1-866-350-8325.

    Your Selected Swatches:

      Swatch Field:

      Click the button below to add the Tivoli Sectional Square Corner Chair Replacement Cushion to your wish list.