- "Ambi-Fire" 4" diameter borosilicate glass tube
- "Ambi-Glo" commercial grade stainless steel emitter grid
- 42,000 BTU's
- One piece aluminum reflector included
- "Pyramid" ceramic burner system
- "Sure-Start" continuous ignition system
- 100% safety pilot system
- Safety "Tip Over" switch for added protection
- 304 Commercial Grade Stainless Steel
- Chrome flame side reflectors
- Wheel kit included
- Easy installation
- Liquid Propane use only
- Requires 20 lb. cylinder equipped with Overfill Protection Device (not included)
- Warranty: One year; Structural Five Year
Stainless steel does not "rust," however varying atmospheric conditions; areas with acid rain, beach and ocean areas with heavy misty conditions may leave brown deposits on the heater. This is to be expected of any stainless steel product used outdoors.
We recommend washing the outer stainless steel components such as the post and decorative cover and perforated material around the lighting instructions with a mild detergent solution and immediately wiping it clean with a dry soft cloth. The stainless steel can be expected to darken and discolor around the heater head and pan as it sustains extreme temperatures. This is normal and to be expected with any outdoor gas heating or cooking appliance.
Never use a cleaning agent that is flammable or corrosive. Never spray any cleaning product on the emitter grid or burner area. If you purchased a powder-coated model, treat it just like you would any other piece of fine outdoor patio furniture. Wash all painted parts of the heater with a soapy solution and protect it with a coat of automobile car wax a couple of times per year or as required dependent upon your local weather and climate conditions.
If you need to touch up a painted heater only paint the post and base portions. Never paint the emitter grid, lighting instructions, valve or control knob area, or the LP cylinder.
The burner ports must also be kept clear so that the burner burns evenly and the flow of gas is not restricted. If the heater is not performing adequately it will be necessary to check the burner and burner venturi. In a salt air or ocean environment, corrosion and rust occurs at a far greater rate than in non-ocean areas. You will need to more frequently check for corrosion and replace parts as required.
The best protection for the critical heater head is a Patio Comfort cover that has been specifically designed for your heater. A stainless steel protective cleaner such as PGS Stainless Steel Cleaner will help protect the finish of all stainless steel components.
- Width: Top Base - 20.5" / Bottom Base - 22"
- Height: 92.5"
- Weight (lbs.): 71
Assembly: Minor assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.
If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.
Patio Comfort heaters are warranted against any defects in parts for a period of 1 year from the date of purchase with original purchase receipt. We will warranty against structural defects all external stainless steel components (posts, bases, & decorative covers) for 5 Years from date of purchase.
This ONE-YEAR Consumer warranty is only applicable for consumer or residential applications. We offer a 120-day warranty protection for heaters that are used in a commercial or rental application. Commercial warranty does NOT cover emitters, ignition, or burners) or component failure caused by abuse, transportation, or misuse.