zoom inClick to Zoom

Tungsten Smart-Heat 6000w Electric Patio Heater

SKU#: BH04200xx    ID#: 1012
with Free Shipping
with Free Shipping

Shopping for a Client?
Unlock your trade benefits

WarrantyCovered by the Bromic Heating warranty.

Contact us for assistance, a free design consultation or to order by phone.

About this Item

Highlights

  • Powerful infrared electric heater with exceptional heat output
  • Choose from a Black or Matte White frame finish
  • Heats up to 160 sq. ft.; 240V/25A, 208V/28.8A, 277V/21.6A power connection
  • W56 in. x D8.5 in. x H3.5 in.; 22 lbs

Specifications

BTUs20500 
Watts6000 
Width8.50 in
Height3.50 in
Length56.00 in
Weight22.00 lbs
Voltage240V/208V/277V 
Amp Rating25A/28.8A/21.6 A 
Hidden TankNo 
Heating FuelElectric 
Mount Height6 - 8 ft 
Heater MaterialStainless Steel 
Heat Coverage Area101 sq. ft. or more 

Description

Bromic Heating's Tungsten Smart Heat Electric Patio Heater blends style and function into a never seen before 6,000 Watt infrared heater, providing efficient directional warmth for both commercial and residential outdoor spaces. The heater has a corrosion-resistant, high temperature coating available in matte black or white, and a tamper-proof electrical wiring enclosure to help extend its life and quality. Included with each patio heater is an easy pivoting wall/ceiling mount. This adjustable mount allows for movement of the patio heater, targeting the direction of heat towards a specific location, while a spectral reflector distributes warming radiant heat evenly.

Bromic Electric Heaters operate using a 220V/9A power connection and are typically operated with smart system controls to create custom heating preferences. The next generation infrared heating element tubes are frosted to reduce the harsh glare, producing a warm and attractive amber glow. Optional Wireless ON/OFF control switch unit allows the power output of the heater to be turned on/off, impulsive or timer controlled up to 8 hours, 59 minutes and 59 seconds. The wireless control is enclosed in a protective box and can be used with 110 - 230VAC supply voltages. Can control two 3000W heaters at 230VAC (1500W at 110VAC). Includes 4-channel remote. Read the Bromic On/Off Manual for more information. Electric heaters also have the option for a Wireless Dimmer control switch, allowing customers unprecedented control over heating output. This unit allows the power output of a heater to be adjusted for perfect comfort, with the ability to adjust multiple units in unison with a single remote. Each Tungsten Electric Smart-Heat Wireless Dimmer Control can manage up to 6500W of heating and can be used in 120VAC, 208VAC and 240VAC applications. Enclosed within an IP54-rated protective casing, a 7-channel transmitter allows users to dim or brighten their heaters at the touch of a button, offering customizable comfort and exceptional reliability. Read the Bromic Dimmer Manual for more information.

Additional product details may be found by reading the Bromic Manual. This helpful manual includes technical specifications, installation/mounting recommendations, a pre-install checklist, maintenance & care info and the manufacturer warranty.

Features:

  • Heats approximately 160 sq. ft.
  • 3,000 / 6,000 Watts
  • Full Stainless Steel Construction
  • Wind resistant to 8 mph
  • Automatic "Smart" Re-Ignition
  • 220v / 9A Power Connection
  • Seven year manufacturer's warranty on heating element
  • One year manufacturer's warranty on casing
  • Surface ceiling/wall adjustable mount included
  • Water/Splash Resistant

At A Glance

  • Assembly Requiredassembly required
  • Electricelectric heating fuel

Product Protection

Control compartment, burner and circulation air passageways of the heater must be kept clean. Inspect and clean at least every six months or more frequently in adverse conditions. Ensure there is no excessive build-up of dirt/dust on the reflector surfaces of the heater. Ensure heater is not on ,cool to touch and wipe off any dirt/dust with a soft & dry cloth.

Bromic recommends the following:
Always install with the corresponding Bromic heat shield and clean according to Bromic instructions. Clean the heater weekly during regular use and at least monthly when not in use. In a salt-air environment, such as near the ocean, cleaning is recommended more frequently. Heaters must not be cleaned with cleaning products that are combustible or corrosive. Over prolonged use may cause slight discoloration of painted surfaces. This is normal and does not effect the operation of the appliance. Bromic uses specialized high temperature paints and as such re-painting should not be attempted. Replacement parts can be purchased to restore the heater to its original appearance from Bromic Pty Ltd. (Refer to parts list in Bromic Manual).

Servicing
Bromic outdoor radiant heaters require regular servicing to maintain efficient operation. The heaters are used on a cyclical basis however are exposed to the external elements continuously (both during periods of use and whilst remaining idle). Regular servicing is therefore required to ensure trouble free operation. All maintenance should be carried out ONLY by authorized service personnel. Servicing is recommended at the commencement of each winter season and more frequently in adverse conditions. Please refer to the Bromic Manual for the standard Bromic servicing instructions.