Colors may vary based on differences in monitors, lighting, dye lots, and fibers. If you're shopping for fabrics, order free swatches to most accurately view colors.
Return Policy
One or more components of this product are not eligible for return. Learn more ›Lead Time
White Glove Delivery Available
How does it work?Shopping for a Client?
Unlock your trade benefits
Covered by the Lynx Grills warranty.
How can we help?
Contact us for assistance, a free design consultation or to order by phone.
About the Lynx Grills Sedona 22" Built-in Double Gas Side Burner
Highlights
- Two burners that you can turn from low simmer up to intense heat at 12,500 BTUs.
- Striking illumination—backlit blue control knobs.
- Stainless steel cover to protect the burner when not in use.
At A Glance
- light
- warranty
- Made in USA
- natural gas cooking fuel
- liquid propane cooking fuel
- professional installation required
dimensions
Width | 22.00 in |
Depth | 17.00 in |
Height | 4.18 in |
Cutout Width | 21.00 in |
Cutout Depth | 16.00 in |
Cutout Height | 4.00 in |
Weight | 35.00 lbs |
Specifications
Burner Material | Stainless Steel |
Burner Type | Built-in |
Number of Burners | 2 |
Cooking Fuel | Liquid Propane, Natural Gas |
Light | Yes |
Model | Sedona by Lynx |
BTUs | 12,500 |
Country of Origin | USA |
Assembly Required | Yes |
Level of Assembly | Professional Installation Required |
Description
Create an outdoor kitchen with the convenience and capacity of an indoor stovetop with the Lynx Sedona Double Side Burner. A single extra wide stainless steel grate stretches over both 12,500 BTU burners. Each burner has its own LED-lit control knob. The burner and burner basin are sealed for easy cleanup in the event of a spill. Protect the burner when it is not being used with the included stainless steel cover. This model is also available as a single side burner.
Why Choose Lynx?
A leader in outdoor appliances, Lynx Grills began in 1996 when a small group of visionaries who had spent more than 30 years building commercial-quality stainless steel equipment for restaurants decided to try something new. They wanted to apply the same high standards, premier materials, skilled craftsmanship, and never-ending innovation to the world of outdoor cooking.
They decided to take outdoor cooking beyond the grill and build it into a luxury experience with quality products that would last year after year. Lynx’s proprietary welding technique ensures that corners are seamless, eliminating gaps where residues could collect and giving each piece a trademark gleam. Powerful cast-brass burners provide high cooking power that’s spread evenly across the cooking surface thanks to ceramic briquette technology and a heat-stabilizing design.
AuthenTEAK proudly offers a complete catalog of Lynx outdoor appliances and accessories, with free shipping on every order and White Glove Delivery available. Our experienced team of experts is also available for free consultations to answer any design questions—from product information to spatial planning. AuthenTEAK’s award-winning showroom is located in Atlanta.
Product Protection
Lynx products are known for their attractive appearance. We achieve this by selecting only the finest grades of stainless steel and applying exacting workmanship. In order to maintain this attractive appearance over the life of the grill it is important to take the following steps:
- After each use wipe down the exterior of the grill to remove grease and splatters.
- Be sure to follow the cleaning instructions for keeping the grates and burners clean and ready for use.
- Use a commercially available Stainless Steel cleaner to clean and polish the exterior surfaces.
Doing these things on a regular basis minimizes the amount of effort required. Part of the appeal of your Lynx Grill is the fine grain finish. When removing stubborn stains:
- Do not use metallic abrasives and always rub in the direction of the grain.
- Some household cleaning products are not suitable for stainless steel; be sure to read the label before using on your Lynx Grill.
- Always use the mildest cleaning solution first, scrubbing in the direction of the grain. Specks of grease may gather in the grain of the stainless steel and bake on to the surface, giving the appearance of rust.
To remove these baked-on foods use a fine to medium grit non-metallic abrasive pad (Scotch Brite is good) in conjunction with a stainless steel cleaner. Solutions used for cleaning concrete and masonry can be very corrosive and will 'attack' stainless steel. Ensure your Lynx products are well protected before you allow the use of such chemicals near your grill.
SPECIAL NOTE FOR LOCATIONS NEAR POOLS AND COASTAL AREAS
The 304 stainless steel material used in the construction of a Lynx Grill is highly rust resistant, however, chlorine in the air from swimming pools or the salt from sea air may cause surface rust to appear and even create some pitting if left on the product.
Here are a few tips to avoid this:
- Regularly wipe down the exterior surfaces with a damp cloth. (Micro fiber cloths such as Ecloth perform very well).
- Allow the surfaces to dry before installing the cover. Do not cover a damp grill.
- In extreme environments apply a rust inhibitor which leaves a microscopic protective layer on the grill. Products that provide a layer of vapor corrosion inhibitors (VpCI) protect the surface very well.
- For seasonal storage use the product referred to above, ensure the grill is dry and then cover and secure the cover to minimize the amount of damp air getting to the surfaces.
THE LYNX LIMITED LIFE TIME WARRANTY PROVIDES PROTECTION AGAINST RUST THROUGH OF PARTS THAT RENDER THE PRODUCT INOPERATIVE. IT DOES NOT COVER OCCASIONAL SURFACE RUST OR STAINING DUE TO ENVIRONMENTAL CONDITIONS.
After your first use certain areas of the grill may discolor from the intense heat given off by the burners - this is normal and cannot be cleaned off. For light and heavy food stains there are many different stainless steel cleaners available.
DRIP TRAY
The drip tray should be cleaned after each use. After the grill is completely cool, remove the drip tray by pulling it out until it stops, then lifting the front edge until the drip tray comes free.
Clean it with hot soapy water or an oven-style cleaning product and re-install. When using an oven-style cleaning product be sure to carefully follow the manufacturer's instructions. Many of these cleaners are toxic and can damage the stainless steel finish if not used properly.
Also, check the tray after rain. If you've left the grill uncovered, you may need to remove the drip tray drain plug to drain the water from the tray. The drain plug can be removed with a flat-head screwdriver
DO NOT ALLOW EXCESS GREASE OR LIQUIDS TO ACCUMULATE IN THE DRIP TRAY AS THIS MAY CREATE A FIRE HAZARD. NEVER USE GRILL WITHOUT DRIP TRAY PROPERLY INSTALLED.
GRILLING RACKS
The easiest way to clean the grill racks is to do so immediately after turning off the burners, while they are still hot. Wearing a long BBQ mitt to protect your hand from steam, dip a brass bristle brush in hot water and scrub the grill rack. Dip the brush frequently because the steam helps remove baked-on foods.
CERAMIC BRIQUETTES
The ceramic briquettes normally burn off any accumulated food drippings. But you may occasionally experience larger spills that don't burn off under normal use. When this happens, let the grill cool completely. Remove the racks and then the briquette trays by lifting the front edge and pulling them toward you.
Flip the trays over and put them back in place over the burner. Light the burners and set them to ?HI? for 5 - 10 minutes to burn the briquettes clean. Any remaining food items can be brushed off using a soft brush. Be sure the trays have completely cooled before reinstalling them. Replacement briquette trays can be ordered from Lynx or from your dealer.
MAIN ceramic burner
Make sure the grill is completely cool before proceeding. Ensure that the gas supply is off and all control knobs are in the "OFF" position.
To Remove ceramic burners:
Remove the grill racks and briquette trays. Lift the burner up until the legs exit the frame. Then pull to the rear of the grill so the burner head comes off the orifice at the front. Angle the burner sideways and lift it out. Be careful not to change the air shutter position.
To Clean the ceramic burner:
To maximize grill performance, clean the exterior of the burner with a wire brush. Remove stubborn scale with a metal scraper. Clear any clogged ports with a straightened paper clip. Never use a wooden toothpick as it may break off and clog the port. Shake out any debris through the air shutter. Use a flashlight to inspect the burner inlet to ensure it is not blocked. If obstructions can be seen, clean it with a paper clip or a pipe cleaner.
PROPER PLACEMENT OF EACH BURNER IS CRITICAL. AFTER CLEANING THEY MUST BE CENTERED ON THE ORIFICE, RESTING LEVEL WITHOUT ANY ROCKING. FAILURE TO MEET THESE CONDITIONS MAY CAUSE A VERY DANGEROUS CONDITION THAT CAN CAUSE PERSONAL INJURY AND PROPERTY DAMAGE.
- After each use wipe down the exterior of the grill to remove grease and splatters.
- Be sure to follow the cleaning instructions for keeping the grates and burners clean and ready for use.
- Use a commercially available Stainless Steel cleaner to clean and polish the exterior surfaces.
Doing these things on a regular basis minimizes the amount of effort required. Part of the appeal of your Lynx Grill is the fine grain finish. When removing stubborn stains:
- Do not use metallic abrasives and always rub in the direction of the grain.
- Some household cleaning products are not suitable for stainless steel; be sure to read the label before using on your Lynx Grill.
- Always use the mildest cleaning solution first, scrubbing in the direction of the grain. Specks of grease may gather in the grain of the stainless steel and bake on to the surface, giving the appearance of rust.
To remove these baked-on foods use a fine to medium grit non-metallic abrasive pad (Scotch Brite is good) in conjunction with a stainless steel cleaner. Solutions used for cleaning concrete and masonry can be very corrosive and will 'attack' stainless steel. Ensure your Lynx products are well protected before you allow the use of such chemicals near your grill.
SPECIAL NOTE FOR LOCATIONS NEAR POOLS AND COASTAL AREAS
The 304 stainless steel material used in the construction of a Lynx Grill is highly rust resistant, however, chlorine in the air from swimming pools or the salt from sea air may cause surface rust to appear and even create some pitting if left on the product.
Here are a few tips to avoid this:
- Regularly wipe down the exterior surfaces with a damp cloth. (Micro fiber cloths such as Ecloth perform very well).
- Allow the surfaces to dry before installing the cover. Do not cover a damp grill.
- In extreme environments apply a rust inhibitor which leaves a microscopic protective layer on the grill. Products that provide a layer of vapor corrosion inhibitors (VpCI) protect the surface very well.
- For seasonal storage use the product referred to above, ensure the grill is dry and then cover and secure the cover to minimize the amount of damp air getting to the surfaces.
THE LYNX LIMITED LIFE TIME WARRANTY PROVIDES PROTECTION AGAINST RUST THROUGH OF PARTS THAT RENDER THE PRODUCT INOPERATIVE. IT DOES NOT COVER OCCASIONAL SURFACE RUST OR STAINING DUE TO ENVIRONMENTAL CONDITIONS.
After your first use certain areas of the grill may discolor from the intense heat given off by the burners - this is normal and cannot be cleaned off. For light and heavy food stains there are many different stainless steel cleaners available.
DRIP TRAY
The drip tray should be cleaned after each use. After the grill is completely cool, remove the drip tray by pulling it out until it stops, then lifting the front edge until the drip tray comes free.
Clean it with hot soapy water or an oven-style cleaning product and re-install. When using an oven-style cleaning product be sure to carefully follow the manufacturer's instructions. Many of these cleaners are toxic and can damage the stainless steel finish if not used properly.
Also, check the tray after rain. If you've left the grill uncovered, you may need to remove the drip tray drain plug to drain the water from the tray. The drain plug can be removed with a flat-head screwdriver
DO NOT ALLOW EXCESS GREASE OR LIQUIDS TO ACCUMULATE IN THE DRIP TRAY AS THIS MAY CREATE A FIRE HAZARD. NEVER USE GRILL WITHOUT DRIP TRAY PROPERLY INSTALLED.
GRILLING RACKS
The easiest way to clean the grill racks is to do so immediately after turning off the burners, while they are still hot. Wearing a long BBQ mitt to protect your hand from steam, dip a brass bristle brush in hot water and scrub the grill rack. Dip the brush frequently because the steam helps remove baked-on foods.
CERAMIC BRIQUETTES
The ceramic briquettes normally burn off any accumulated food drippings. But you may occasionally experience larger spills that don't burn off under normal use. When this happens, let the grill cool completely. Remove the racks and then the briquette trays by lifting the front edge and pulling them toward you.
Flip the trays over and put them back in place over the burner. Light the burners and set them to ?HI? for 5 - 10 minutes to burn the briquettes clean. Any remaining food items can be brushed off using a soft brush. Be sure the trays have completely cooled before reinstalling them. Replacement briquette trays can be ordered from Lynx or from your dealer.
MAIN ceramic burner
Make sure the grill is completely cool before proceeding. Ensure that the gas supply is off and all control knobs are in the "OFF" position.
To Remove ceramic burners:
Remove the grill racks and briquette trays. Lift the burner up until the legs exit the frame. Then pull to the rear of the grill so the burner head comes off the orifice at the front. Angle the burner sideways and lift it out. Be careful not to change the air shutter position.
To Clean the ceramic burner:
To maximize grill performance, clean the exterior of the burner with a wire brush. Remove stubborn scale with a metal scraper. Clear any clogged ports with a straightened paper clip. Never use a wooden toothpick as it may break off and clog the port. Shake out any debris through the air shutter. Use a flashlight to inspect the burner inlet to ensure it is not blocked. If obstructions can be seen, clean it with a paper clip or a pipe cleaner.
PROPER PLACEMENT OF EACH BURNER IS CRITICAL. AFTER CLEANING THEY MUST BE CENTERED ON THE ORIFICE, RESTING LEVEL WITHOUT ANY ROCKING. FAILURE TO MEET THESE CONDITIONS MAY CAUSE A VERY DANGEROUS CONDITION THAT CAN CAUSE PERSONAL INJURY AND PROPERTY DAMAGE.
California Resident Proposition 65 Information
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov/
Warranty
LIMITED LIFETIME WARRANTY
The stainless steel grill body, ceramic grill burners, cooking grates, TridentTM burner and rotisserie infrared burner are warranted to be free from defects in material and workmanship when subjected to normal domestic use and maintenance for the lifetime of the original purchaser. This warranty excludes surface corrosion, scratches, and discoloration which may occur during normal use. This warranty is limited to the replacement of the defective parts, with the owner paying a processing fee and all other costs including labor. Failure to perform required maintenance will void this warranty.
LIMITED FIVE-YEAR WARRANTY
The following grill parts are warranted to be free from defects in material and workmanship, when subjected to normal domestic use and maintenance, for a period of five (5) years from the original date of purchase; warming racks, spit rods, briquette trays, manifolds and gas valves. This warranty is limited to the replacement of the defective parts, with the owner paying a processing fee and all other costs including labor.
LIMITED TWO-YEAR WARRANTY
All other grill components are warranted to be free from defects in material and workmanship, when subjected to normal domestic use and maintenance, for a period of two (2) years from the original date of purchase. This warranty is limited to the replacement of the defective parts, with the consumer paying all labor costs.
LIMITED ONE-YEAR WARRANTY
For a period of one (1) year from the original date of purchase, Lynx will replace or repair parts found to be defective at no cost to the original purchaser. This includes the cost of shipping replacement parts and, where necessary, service labor at prevailing local rates by a Lynx authorized service person. Service will be provided during normal business hours and must be authorized in advance by Lynx.
Returns
We want you to love every new item from AuthenTEAK. If something is wrong with your merchandise, know that we are available to assist with refunds and/or exchanges. See below for details.
To help ensure a smooth order process, where your product, lead time, and shipping/delivery expectations are met or even exceeded, please contact us with any questions prior to placing your order. Our customer care team is available by emailing customercare@authenteak.com where we respond between 10 a.m. and 5 p.m. ET, Monday–Friday.
Returns & Exchanges
With proof of purchase, you may return or exchange an eligible item within 30 days of delivery. All returns must be in original condition and packaging. We cannot accept returns for items that have been opened, assembled, altered, used or made to order. AuthenTEAK does not offer free returns and the customer is responsible for all costs associated with returning merchandise. All returns are subject to a 15% restocking fee. If you choose to exchange an eligible item, a portion of the restocking fee may be waived.
If the order was shipped and/or delivered at no charge—including any free White-Glove promotions—the cost of that shipping and/or delivery service will be deducted from any eligible refunds.
All refunds must include a Return Authorization (RA) number. To obtain an RA number and process your refund, please complete the form below. Refunds are processed within one week of receipt and inspection of merchandise.
Final Sale Merchandise
The following merchandise is non-returnable, non-cancellable, and non-refundable:
- Pillows
- Fabric by the Yard
- Furniture Cushions and Casings
- Curtains and Drapes
- Custom Furniture
- Special Order Frame Finshes
- Grills, Smokers, and Pizza Ovens
- Appliances and Kitchen Components
- Kitchen Cabinetry
- Reducer Rings and Umbrella Caps
- Upholstered Furniture
- All Talenti brand products
- Replacement Umbrella Frames, Bottom Poles and Parts
- Replacement Umbrella Canopies
- Planters with Drainage Holes
- Replacement Slings
- SunBrite TV products
Single Chair Purchase Policy – Final Sale
Due to the high cost of outbound shipping and the potential return shipping costs, the following merchandise purchased individually / purchased as a quantity of one (1), is considered FINAL SALE MERCHANDISE and not eligible for return:
- Chairs
- Chaises / Lounge Chairs
- Bar Stools / Bar Height Chairs
- Counter Height Chairs and Stools
- Adirondacks
Pricing
All prices on our website are in U.S. dollars and are subject to any applicable taxes according to state and local laws. Availability, prices, and delivery lead times are subject to change without notice.
There may be unintentional errors in the prices, descriptions, or images of certain merchandise, and we must reserve the right to restrict orders of those items and correct any errors or inaccuracies.
Ratings & Reviews
Do you own this product? Be the first to rate it.
Your feedback will help customers like you make informed decisions and will help us to improve our product offerings!
If you have any questions regarding the customer service you received, please contact us.