Bromic HeatingPlatinum Smart-Heat Marine Grade Series II 54" Wall Mount Electric Patio Heater - 4500 Watt

Installation MUST be carried out by a licensed and authorised technician in accordance with local electrical codes.

The IPX5 marine grade variants shall be installed for land and coastal environment application ONLY. The IPX5 marine grade heater shall NOT be installed on marine craft.

The Bromic Platinum Smart-Heat Marine Heater has been developed & engineered specifically for marine applications and coastal environments and are the only outdoor heaters on the market that are fully Lloyd’s register certified. Made of high-quality, AISI316 stainless-steel, Bromic Platinum Smart-Heat™ Electric Marine heaters were specifically engineered to provide superior resistance to the corrosive elements of coastal and marine environments. With their slim, aesthetic design and wind-resistant, radiant heat output, the Platinum Smart-Heat™ Electric Marine heaters are the ideal solution to enrich the comfort experience of owners of coastal residences and superyachts & guests on cruise ships. Available in both black and white and in 208V (commercial applications) or 240V (residential applications). The 4500-watt Platinum MG electric heater provides a blanket of warmth up to 143 square feet. This premium heater was specifically designed for low-clearance, semi-enclosed spaces and can be mounted with minimal clearance requirements.

Control compartment, burner and circulation air passageways of the heater must be kept clean. Inspect and clean at least every six months or more frequently in adverse conditions. Ensure there is no excessive build-up of dirt/dust on the reflector surfaces of the heater. Ensure heater is not on ,cool to touch and wipe off any dirt/dust with a soft & dry cloth.

Bromic recommends the following:
Always install with the corresponding Bromic heat shield and clean according to Bromic instructions. Clean the heater weekly during regular use and at least monthly when not in use. In a salt-air environment, such as near the ocean, cleaning is recommended more frequently. Heaters must not be cleaned with cleaning products that are combustible or corrosive. Over prolonged use may cause slight discoloration of painted surfaces. This is normal and does not effect the operation of the appliance. Bromic uses specialized high temperature paints and as such re-painting should not be attempted. Replacement parts can be purchased to restore the heater to its original appearance from Bromic Pty Ltd. (Refer to parts list in Bromic Manual).

Servicing
Bromic outdoor radiant heaters require regular servicing to maintain efficient operation. The heaters are used on a cyclical basis however are exposed to the external elements continuously (both during periods of use and whilst remaining idle). Regular servicing is therefore required to ensure trouble free operation. All maintenance should be carried out ONLY by authorized service personnel. Servicing is recommended at the commencement of each winter season and more frequently in adverse conditions. Please refer to the Bromic Manual for the standard Bromic servicing instructions.