HoueThermo Ash Maintenance Oil

Process for Oiling Thermo Ash:
Re-oiling your Thermo Ash tabletops is extremely easy and quick with amazing results.

1. Wipe down the surface with just water and a soft brush, allow to dry.

2. Then sand using a 200 or 240 grain sandpaper, in same direction as the wood grain. Dust off or wipe.

3. Apply the oil using a soft paint brush or cloth. First run the brush edge in the gaps between the lamellas. Ensure you have covered this properly. Unlike stain, oil will not leave bubbles or drip lines.

4. Once the spaces are done you can start on the surface. Apply liberally to ensure even coverage and brush in the direction of the grain.

5. Within 5 to 10 minutes of application use a rag to wipe of the excess oils on each lamella. Usually 3 strokes per lamella will remove enough.

6. Allow to dry for 30 to 50 minutes