KannoaSaint Barts Stacking Aluminum Dining Side Chair

The stylistically thin lines of our Saint Barts Collection are anything but delicate. Fully suitable for the outdoors and commercial installations, the robust powder coated aluminum frame is extremely durable. The sophisticated look of the polished finish, make for a stylish blend of function and modern design that is unique to Saint Barts.

Kannoa uses only 100% non recycled, powder-coated, aluminum frames that are hand made by metal craftsmen and every joint point is professionally welded. The powder-coated finish, is permanently baked on and enhances the furniture’s scratch resistance. Kannoa's aluminum outdoor furniture resists rust and moisture damage better than other metals and is strong yet relatively lightweight, making it easy to rearrange and store. Built to stay beautiful and withstand the elements like rain, wind and heat.

We offer other Kannoa collections; for the entire catalog please review the Kannoa Catalog for additional information.

Powder Coated Steel
General Cleaning: Products that have been powder coated should be cleaned with a soft brush or cloth, using mild soap and very warm water. Soaps that have emulsifiers that break down common stains and are scum free are the best to use. For more detailed cleans you may use a pressure washer using filtered water under low pressure. Mild detergent may be used, but do not use chlorine or harsh cleaning solutions. It is very important that low pressure be used in pressure cleaning. If the pressure is strong enough to move the metal surface, it may be strong enough to damage the finish as well.

All-Weather Wicker
Product Care Wash any collection of KANNOA woven furniture with a solution of mild liquid detergent and water. Rinse with clear water. Dry thoroughly.

Sling Woven Fabric
General Cleaning: We recommend that slings are cleaned using a Woven Cleaner. It is important to use a non-foaming cleaner on slings, as a foaming product will leave residues in the gaps in-between the weave which will then attract dirt. A pressure washer should not be used on sling as it may damage the fabric.

Aluminum
Clean with water when needed. Dry with a soft cloth. When caring for your piece, keep in mind that it will scratch like any metal. If your product begins to tarnish you can use an aluminum polish. Aggressive alkaline or acid cleaners must never be used. Cleaning hot, sun-heated surfaces should be avoided since possible chemical reactions will be highly accelerated, and cleaning non-uniformity could occur.

Faux Teak
Wash any collection of KANNOA faux wood furniture with a solution of mild liquid detergent and water. Rinse with clear water. Dry thoroughly. Avoid using products meant for natural wood. These products can stain the finish.

Cement
DO NOT use traditional heavy acid cleaners, which are formulated and may be suitable for commercial concrete installations or pool servicing. These acids are too caustic for use on outdoor concrete furniture.
DO NOT pressure wash with high-pressure powered pressure washers, for most applications a garden nozzle will be enough pressure to clean the furniture.
DO CLEAN spills as soon as possible, using a mild soap and water, for more aggressive spills, you can use a mild household standard chlorine bleach diluted 1 part bleach 2 parts water and use on the entire surface to be cleaned.
For general day-to-day cleaning if needed spray your table with water then lightly with a household spray: Mix 1 part bleach with 2 parts water. Leave on for 5 minutes; then spray off with a garden hose.
DO NOT drag a concrete table to a new position outdoors. This will cause irreparable damage to the table. The weight and size of the tables need the help of 3 to 4 adult people.

Cushion Care
Product Care General Cleaning: Brush off any loose dirt. Prepare a cleaning solution of 2 ounces (1/4 cup) mild soap per gallon of lukewarm water. Use a sponge or a soft bristle brush to clean. Allow cleaning solution to soak into fabric. Rinse thoroughly to remove all soap residue. Allow fabric to air dry. Spot Cleaning: Apply a light mist of mild soap and water using a spray bottle. Work the solution into the stain by lightly scrubbing the area with a sponge or very soft bristle brush. Rinse thoroughly to remove all soap residue. Blot excess moisture with a clean, soft towel or sponge. Wet-vacuum or blot excess water. Air dry, Repeat steps 3 and 4 until all soap residue is removed.