Lynx GrillsProfessional 50" Eave-Mounted Gas Patio Heater

The Lynx Eave-Mounted 48" Outdoor Patio Heater offers a slim, attractive design in all stainless steel construction. The all-weather heater can be used with either liquid propane or natural gas. It includes a wireless, wall-mounted, on-off switch with temperature control settings.

This 35,000 BTU heater has a remote control that provides six levels of heat adjustment for a natural gas configuration and three levels for a liquid propane configuration. This patio heater is wind resistant and has a spark ignition with auto re-light. This heating unit is battery operated or it can be plugged into the included 110v AC adaptor.

For more information about the features, gas supply connection and mounting options please download the Lynx Eave Mount Care & Use Manual. For exact measurements please review our Lynx Eave Mount Dimensions Sheet.

Optional 12' Quick Disconnect with shutoff and Nipple is available for use with LP or NG. 3/4" ID hose ensures adequate gas supply. 12' hose includes 3/4" quick disconnect fitting at one end and 3/4" male pipe thread on the other and a manual shut-off valve.

Allow the heater and the emitter to cool down before handling. Installation and maintenance must be performed by a qualified technician. Turn off the power before beginning maintenance. Do not attempt to service or repair the unit while it is running. Should the heater be dropped or damaged or malfunction at any time, immediately turn off the main power source and do not use it until it has been examined by an authorized service facility.Notice: Do not touch the emitter with bare hands. Wearing soft cotton gloves is highly recommended. Finger prints will burn into the carbon emitter during use and cause premature heater failure. If the emitter is anidvertently touched, or if it needs to be cleaned, carrefully wipe it using rubbing alcohol or methylated spirits.