PolywoodChippendale Outdoor Daybed Swing

Must be affixed to fully load-bearing 2’x 6’ or larger ceiling joists; please consult a professional to confirm your structure’s weight-bearing capacity (professional installation recommended). Recommended clearance: 3–4 ft. front and back; 12–14 in. on either side.

Like basking in early morning light or listening to rain on a tin roof, The POLYWOOD Chippendale Outdoor Daybed Swing is utterly relaxing. Suspended by two ultradurable ropes, the twin-sized daybed gently glides back and forth to lull you into complete bliss. The oversized silhouette makes a picture-perfect statement on your porch or gazebo, and plush cushions round out this undeniably cozy perch. This swing can fit a twin mattress if desired (not included).

The swing is made in the USA and constructed of genuine POLYWOOD® lumber, a proprietary blend made from sustainable materials including landfill-bound and ocean-bound plastics. The durable, all-weather lumber is not prone to splinter, crack, chip, peel, or rot and cleans easily with soap, water, and a soft-bristle brush. There is UV protectant and color continuously throughout the HDPE material - so you don't need to worry about waterproofing or painting.

The Chippendale Outdoor Daybed Swing includes quick-drying, durable cushions covered in all-weather performance Revolution fabric that resist weather, salt, sun, mold, and mildew.

Weight tested up to 250 lbs. per seat.

Plastic Frame Care

POLYWOOD material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color. Also, a popular method of cleaning is a high-pressure power wash. (Not to exceed 1,500 psi, which is the equivalent of a car wash.) The surface characteristics of the product may require the use of a soft bristle brush to get into the creases.

The hardware used in the assembly and construction of our furniture is an 18-8 commercial grade stainless steel that has an additional Xylan protective and cosmetic coating. Although the quality of the hardware has a high level of corrosive resistance, the hardware can show some signs of corrosion in salt air environments.

A practical solution to these signs of corrosion would be to wash the product with soap and water. Use a soft bristle brush to scrub the corroding areas of the hardware. Also, use appliance touch-up paint in the appropriate color to protect the hardware. Appliance touch-up paint can be purchased at local hardware stores.

Cushion Care

POLYWOOD's cushions are made using high quality 100% solution-dyed acrylic or acrylic blended fabrics, and the finest outdoor foam and fiberfill. Fabrics have been factory-treated to resist stains and mildew. Regular cleaning with mild soap and water using a sponge or soft brush is recommended. To remove mildew stains, use a solution of one cup bleach and one half cup laundry detergent mixed in a gallon of warm water. Apply the solution to the seating surface, allow to soak for ten minutes, thoroughly rinse, and allow to air dry before using. Cushions will dry at a much faster rate when removed from the frames and placed on their sides or edges.