PolywoodVineyard Dining Armchair

Enhance your outdoor dining experience by adding a few Vineyard Dining Arm Chairs with a coordinating POLYWOOD dining table to your patio, deck, or veranda. This chair has a simple and charming look, and it's perfectly contoured to provide exceptional comfort to anyone who sits in it.

The piece is constructed of genuine POLYWOOD® lumber that is not prone to splinter, crack, chip, peel, or rot and is built to withstand a range of climates including hot sun, snowy winters, and strong coastal winds. There is UV-protectant and color continuously throughout the HDPE material and requires no painting or waterproofing. The frame is easily cleaned with soap, water, and a soft bristle brush.

The optional high-performance outdoor cushions resist weather, salt, sun, mold, and mildew and are quick-drying and durable.

Weight tested up to 350 lbs.

Plastic Frame Care

POLYWOOD material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color. Also, a popular method of cleaning is a high pressure power wash. (Not to exceed 1,500 psi, which is the equivalent of a car wash.) The surface characteristics of the product may require the use of a soft bristle brush to get into the creases.

The hardware used in the assembly and construction of our furniture is an 18-8 commercial grade stainless steel that has an additional Xylan protective and cosmetic coating. Although the quality of the hardware has a high level of corrosive resistance, the hardware can show some sign of corrosion in salt air environments.

A practical solution to these signs of corrosion would be to wash the product with soap and water. Use a soft bristle brush to scrub the corroding areas of the hardware. Also, use appliance touch up paint in the appropriate color to protect the hardware. Appliance touch up paint can be purchased at local hardware stores.

Cushion Care

POLYWOOD's cushions are made using high quality 100% solution-dyed acrylic or acrylic blended Sunbrella fabrics, and the finest outdoor foam and fiberfill. Fabrics have been factory treated to resist stains and mildew. Regular cleaning with mild soap and water using a sponge or soft brush is recommended. To remove mildew stains, use a solution of one cup bleach and one half cup laundry detergent mixed in a gallon of warm water. Apply solution to the seating surface, allow to soak for ten minutes, thoroughly rinse and allow to air dry before using. Cushions will dry at a much faster rate when removed from the frames and placed on their sides or edges.