This product has been made with resistant materials of the highest quality. With correct care and maintenance, you will be able to enjoy it for many years. However, dirt or other contaminants and base use could damage it.
METAL PARTS
For the optimal conservation of pieces manufactured in steel, especially if they are exposed to the elements, periodic maintenance is advised.
For Maximum corrosion resistance, steel surfaces must always be kept clean. This maintenance must be tailored to the conditions to which your product is exposed (dust, dirt, humidity in combination with heat, salty, or potentially corrosive environments). This can vary from one to four times a month, in normal settings, or up to once a day in cases of unhygienic or very rough conditions.
You must be the one who adjusts and evaluates the periodicity of the maintenance according to how well the material reacts, increasing or reducing it depending on what is necessary for proper product care. In any case, RS Barcelona recommends cleaning it at least once a week, as a starting point.
Therefore, it's important to keep the product clean. Please follow these simple instructions to keep the product in good condition:
- For cleaning both steel and stainless steel, use only a cloth dipped in warm water and mild soap. Never use abrasive soaps or detergents, as they can leave scratches and produce discoloration.
- Rub gently with a damp cloth. Rinse and wring the cloth frequently, to keep it moist. Make sure to rinse well and dry with another cloth.
- If the surface is glossy, you must wash it along the grain, to avoid scratching the surface. On polished surfaces, you must previously remove dust to avoid scratching the surface.
- In the event of a spill, clean the stain as quickly as possible.
- If you are unable to remove the stains with a damp cloth, apply a metal cleaner to the surface with a cloth. Read the instructions for the cleaner carefully, and test it first on an inconspicuous spot. Make sure to rinse well and dry with another cloth.
When the product is extremely dirty, with stains, incrustations, or signs of surface discoloration due to long periods of neglect, or poor maintenance, RS Barcelona recommends contacting professionals to restore the surface's initial appearance.
IROKO WOOD
As a natural material, iroko can vary in color, or even crack due to humidity and sudden temperature changes. Exposed to the elements, iroko undergoes a natural oxidation process that affects its color, taking on an attractive silver-grey tone.
Iroko pieces should be treated with a waterproof sealer to protect them from moisture and stains (provided they are cleaned immediately). However, this sealant naturally vanishes over time.
We recommend treating the wood with sealant every three months, or more frequently at dining and hospitality establishments. To restore iroko’s original appearance, sand the entire surface and apply the sealant, following the manufacturer’s instructions.
Never use soaps or abrasive detergents, or furniture cleaning products containing wax, as these types of products form a sticky layer on the surface that attracts dirt.
CLOTH
To enjoy your upholstery textile for a long time, cherish it and use it properly. Keep your textile as clean as possible. Make sure it is cleaned regularly using a vacuum cleaner set to medium to low power and clean with a brush or dry cloth. Do not clean with any type of liquid, not even water, as it may lose the color of the dye.
