This product has been made with resistant materials of the highest quality. With correct care and maintenance, you will be able to enjoy it for many years. However, dirt or other contaminants and bad use could damage it.
METAL PARTS (STRUCTURE)
For the optimal conservation of pieces manufactured in steel, periodic maintenance is advised.
For maximum corrosion resistance, steel surfaces must always be kept clean. This maintenance must be tailored to the conditions to which your product is exposed. This can vary from one to four times a month, in normal settings, or up to once a day in cases of unhygienic or very rough conditions.
You must be the one who adjusts and evaluates the periodicity of the maintenance according to how the material reacts, increasing or reducing it depending on what is necessary for proper product care. In any case, we recommend cleaning it at least once a week, as a starting point.
Therefore, it’s important to keep the product clean. Please follow these simple instructions to keep the product in good condition:
- For cleaning both steel and stainless steel, use only a cloth dipped in warm water and mild soap. Never use abrasive soaps or detergents, as they can leave scratches and produce discoloration.
- Rub gently with a damp cloth. Rinse and wring the cloth frequently, to keep it moist. Make sure to rinse well and dry with another cloth.
- If the surface is glossy, you must wash it along the grain, to avoid scratching the surface. On polished surfaces, you must previously remove dust to avoid scratching the surface.
- In the event of a spill, clean the stain as quickly as possible.
- If you are unable to remove the stains with a damp cloth, apply a metal cleaner to the surface with a cloth. Read the instructions for the cleaner carefully, and test it first on an inconspicuous spot. Make sure to rinse well and dry with another cloth.
When the product is extremely dirty, with stains, incrustations, or signs of surface discoloration due to long periods of neglect, or poor maintenance, we recommend contacting professionals to restore the surface’s initial appearance.
WALNUT OR OAK WOOD (TOP AND LEGS)
We use and select top quality natural woods. Walnut and oak are natural woods for indoor use only. Natural woods are high quality woods that bring an attractiveness to the pieces and a long life. But they require good maintenance and proper care so that they always look like new.
- Avoid giving hard blows and if you deposit some glass that can leave marks, dry it quickly with a cloth.
- Do not place hot pans directly on the wood, since heat will damage the surface, alter its color and shine. Always use place mats or coasters.
- Clean the dust frequently.
- Clean with a cloth dampened in warm water and mild soap and dry it fast with another cloth.
- Always clean gently in the direction of the grain.
- Never use abrasive soap or detergent, sandpaper or steel wool since they could scratch the surface or make colors fade.
- Never use furniture polish which contains wax, since these kinds of products tend to leave a sticky layer on the surface which attracts dust and dirt.
- Water and moisture can also damage these woods, so try to keep them as far away as possible from these elements.
