ShademakerTaurus 10' Square Aluminum Commercial Cantilever Patio Umbrella

Due to cutting requirements, striped fabrics are only available in sets of two. Click here to view these fabrics or call the showroom for additional details.

Introducing the all new Shademaker Taurus 10' Square Cantilever Patio Umbrella. Experience the ease and convenience with the quick and easy open and close system, featuring a gas piston assist for effortless operation. With the ability to rotate 360° and lock into 8 positions, you can effortlessly create the perfect amount of shade throughout the day. 

Embrace modern sophistication with the sleek aluminum hub and fittings, designed for both style and durability. The commercial grade canopy fasteners ensure long-lasting performance, adding not only strength but also a touch of elegance to your outdoor oasis. Built to withstand the elements, the galvanized internal mast stem and high-performance protective cover provide added assurance for lasting quality. The aluminum mast stem cover adds an extra layer of refinement to the overall look. Includes high performance protective cover.

With an impressive 10 ft size, 8’ 3” overall height, and 75 sq ft coverage, this octagonal umbrella offers ample shade to enhance your outdoor enjoyment. Note there is a 300 lbs. base weight minimum for freestanding applications.

All fabrics are made of a solution-dyed yarn, which means the pigments are saturated through the entire thread and are not a print on the surface of the fabric. All fabrics are fade, stain, mold and mildew resistant and are easily cleanable. Shademaker offers both acrylic and polyester fabrics for their umbrella canopies:

• The acrylic fabrics (Grade 1) are available in two weights: furniture grade and awning grade. Furniture grade fabrics are better suited for low-wind, non-coastal areas and residential use.
• The polyester fabrics (Grade 2) are available in awning grade only. Awning grade fabrics are ideal for demanding commercial and high-wind residential locations.

• Hose mast and frame with water periodically, more often if installation is in a salty or industrial environment.
• Inspect the installation fitting on a regular basis and tighten if necessary.
• Lubricate the track and slider car mechanism as needed to enhance the ease of operation. We recommend using DuPont Dry Film Lubrication products.

• Clean up spills and stains right away. Spills can be removed by using a clean absorbent cloth.
• For general maintenance, use a soft brush to remove dust and dry soil. Wash down with clean, warm water (i.e. garden hose) every so often to avoid dirt becoming engrained. Allow the fabric to air dry before closing the canopy.
• If a thorough cleaning is necessary, sponge over the fabric using a mild soap solution (2% solution). Rinse well with plenty of water to remove all soap residues.
• Never use detergents, cleaning fluids or solvents. Grease and oil stains may be removed by using turpentine or similar with an absorbent cloth.
• We recommend giving the canopy a good cleaning on a more frequent basis if installed in a location where the canopy is likely to become soiled.
• Use protective canopy cover during storage.

• While Shademaker umbrellas are made to withstand some wind - it is recommended that the umbrellas always be lowered during windy conditions. If it is too windy to enjoy your umbrella, then the umbrella should be closed. Please remove the umbrella during extreme weather conditions to avoid damage that could be caused by flying debris.
• Note: Wind damage (or any damage caused by acts of nature) is never covered under warranty.
• Sufficient base weight must be used to secure umbrellas at all times. Please see our base chart for minimum requirements for free standing base weight. Mounting your umbrella to an existing deck or patio is always the preferred method of securing your umbrella and is recommended above all other methods. We recommend a licensed contractor to secure your Shademaker umbrellas.