Cleaning and Care for the Marine Grade Polymer Frame Avoid teak oil and other products that can stain the finish. Avoid heat sources that exceed 180 degrees F. Only routine cleaning with common detergents is required. Nylon scrub pads and brushes should be used with care because excessive force can mar the finish. For resistant stains, apply bleach and allow it to soak in. Use citrus cleaner, alcohol or mineral spirits to remove grease or oil stains. Automotive silicone spray products or household furniture polish can help to hide scratches in the surface. Furniture that will be stored outside or in other cold areas should be drained of any water to avoid ice damage in the tubing.
Cleaning and Care for Sling
Spot wash dirt with lukewarm water and a mild soap. Rinse thoroughly with clean water, then air-dry. To clean stubborn stains, in a ventilated area, prepare a mild solution of one cup bleach plus two caps full of a natural soap per gallon of water. Spray the en-tire area, and scrub vigorously if necessary. For stubborn stains use a soft bristle brush. Rinse and allow to dry. Do not use pine oil cleaners on cushion or sling fabrics. For Sunbrella fabrics, blot (don’t rub) liquid spills with a clean, dry cloth. For oil-based spills, apply an absorbent such as corn starch, then remove with a straight edge. Spray on a mild cleaning solution of soap (such as Dawn or Woolite) and water. Rinse the fabric thoroughly to remove all soap residue. Air dry.
