This product has been made with resistant materials of the highest quality. With correct care and maintenance you will be able to enjoy it for many years. However, dirt or other contaminants and bad use could damage it.
METAL PARTS
For the optimal conservation of pieces manufactured in steel, especially if they are exposed to the elements, periodic maintenance is advised.
For maximum resistance to corrosion, steel surfaces must always be kept clean. This maintenance must be tailored to the conditions to which your product is exposed (dust, dirt, humidity in combination with heat, salty or potentially corrosive environments, etc.). This can vary from one to four times a month, in normal settings, or up to once a day in cases of unhygienic or very rough conditions.
You must be the one who adjusts and evaluates the periodicity of the maintenance according to how the material reacts, increasing or reducing it depending on what is necessary for proper product care. In any case, we recommend cleaning it at least once a week, as a starting point.
Therefore, it’s important to keep the product clean. Please follow these simple instructions to keep the product in good condition:
- For cleaning both steel and stainless steel, use only a cloth dipped in warm water and mild soap. Never use abrasive soaps or detergents, as they can leave scratches and produce discolouration.
- Rub gently with a damp cloth. Rinse and wring the cloth frequently, to keep it moist. Make sure to rinse well and dry with another cloth.
- If the surface is glossy, you must wash it along the grain, to avoid scratching the surface. On polished surfaces, you must previously remove dust to avoid scratching the surface.
- If the event of a spill, clean the stain as quickly as possible.
- If you are unable to remove the stains with a damp cloth, apply a metal cleaner to the surface with a cloth.
Read the instructions for the cleaner carefully, and test it first on an inconspicuous spot. Make sure to rinse well and dry with another cloth. When the product is extremely dirty, with stains, incrustations, or signs of surface discoloration due to long periods of neglect, or poor maintenance, we recommend contacting professionals to restore the surface’s initial appearance.
MARBLE (TOP)
Marble is a noble, very resistant stone that offers
natural elegance and attractiveness to any piece. It is a
porous material and stains can easily penetrate.
- Alkaline or acidic liquids (lemon, vinegar...) can damage
the marble. Apply protective pads to undersides of
items being displayed on marble surfaces.
- Wipe up spills immediately with a soft, clean and dry
cloth.
- For daily cleaning we recommend the use of only
damp cloth. If you use soap, use a neutral PH one or
detergents for marble on a soft, clean and dry cloth.
Carefully read the instructions on the detergent’s label
and, in doubt, perform a test on a small, inconspicuous
area.
- Do not use ammonia, bleach and highly alkaline or
acidic cleaners, which can damage the marble and it
can loose its natural bright.
IF THE PRODUCT IS USED OUTDOORS, KEEP IT CLEAN
AND IN GOOD CONDITION, FOLLOWING THESE
INSTRUCTIONS MORE FREQUENTLY.
WHEN THE PRODUCT IS KEPT OUTDOORS AND IS NOT
USED FOR PROLONGED PERIODS, WE RECOMMEND
YOU TO USE THE PROTECTIVE COVER.