Travis Industries50k Tempest Lantern

The 50k Tempest Lantern by Travis Industries features a traditional looking glass lantern design with the same functions as the Tempest Torch and is 40% larger than the 20k Tempest Lantern. It features an all-weather 24V AC Hot Shot electric ignition system. This is a Natural Gas (NG) unit, but comes with a conversion kit for Liquid Propane (LP) . This lantern creates a distinctive source of outdoor lighting for patios, decks and landscapes and has a maximum BTU input of 50,000 (NG) or 45,000 (LP). It is constructed of tempered glass and the majority of steel components are made of 16 gauge 304 stainless steel. The Tempest Lantern can be post mounted, pillar mounted or mounted on your outdoor wall or structural support to provide a handsome decorative element that also illuminates. The Pillar Mount works for columns or pedestals and the Wall Mount is used for entry ways and sides on building. The Deck Mount Post is for installation on decks (98" tall). The In Ground Post is used for installation in ground (buried). If you need additional mounts please refer to the Travis Industries Tempest Lantern Mounts.

Both the Deck Post and the In-ground post can be cut to alter the height of the installation. Note you will have to replace the pilot holes on the cut end to align with the lantern head or deck mount

Tempest Torch Transformer is required and powers up to six electronic lanterns. 

The Tempest Lantern comes as a standard base unit (a.k.a Lantern Head) that includes electronic igniter head assembly, tempered glass, control module, shutoff valve, and flare reducing coupler. Requires 110-24v transformer.

Tempest Torches and Tempest Lanterns are compatible with any of the Hearth Product Controls Outdoor Rated Timers, which allow you to control your torch with an automatic shut-off timer.

For more information on installation and frequently asked questions, please visit our Travis Industries FAQs page.

An AuthenTEAK best-seller, Travis Industries’ award-winning Tempest Torches and Tempest Lanterns produce stunning, atmospheric flames and feature a durable, stainless steel frame with a powder-coated finish. Four different mounting options—pillar mount, in-ground post, wall mount, and deck mount—allow for various applications. The Tempest Torch and Tempest Lantern are fueled by convenient natural gas or liquid propane and feature an easy-access control panel and an automatic gas shut-off if the flame goes out. 

Choose from a low-voltage 24V electric ignition—which can be used with a standard light switch, a remote control, a programmable timer, or connected to a Smart Home system—or a manual ignition, which works much like a gas grill spark ignition.  

AuthenTEAK is proud to offer the complete catalog of Travis Industries products, including the Tempest Torch, Tempest Lantern, the new (40% larger) 50k Tempest Lantern, as well as lighting accessories, posts and mounts, and replacement parts. AuthenTEAK offers Travis Industries products with free shipping, plus a large Quick Ship inventory (products on their way to you within one business day). We also offer Travis Industries products on display in our award-winning, 15,000-square-foot Atlanta showroom, so you can experience them in person and ask our team questions before making a purchase. 

Inspect Torch prior to each use. Keep torch clean, remove any debris that collects in or on Torch. Inspect for spiders and insects, they may clog burner ports or air inlets and need be removed before using. Have the appliance inspected by a qualified service technician annually. The stainless steel burner top will discolor - this is normal.

Your Tempest torch is designed to be cleaned and maintained easily. The most common maintenance that your torch will require is glass cleaning. This is done by loosening the glass retaining screws. Each piece of glass will have its own retainer. Hold the glass by the exposed edge and slide horizontally out of its tracks, the glass should slide easily if its retainer screw is loose.

Clean with glass cleaner or warm soapy water. The glass on your Tempest is tempered and designed for safety. If it breaks it will shatter into small square pieces similar to a car windshield. It is special glass and if you break one or need to replace a piece use only 3/16" thick tempered glass supplied by your Tempest Torch dealer.

To inspect for or clean debris out of the inside of your torch remove one piece of glass. This will provide access to the inside of your torch. Once your glass piece is out remove the pyramid shaped piece with the rings on the top by lifting it straight up, once you are clear of the burner elements turn it sideways and remove through the glass opening. This will provide you a clear view of all the torch components, visually check for and remove all foreign objects, vegetation, bugs , debris. When reassembling make sure you orient the Pyramid plate correctly, the burner elements that stick up through this plate are delicate. Once oriented, slide the plate straight down onto the burner assembly making sure the edges are seated all the way down.

Winterizing the Torch
These procedures only apply to areas where the torch will not be used during winter or for a long period of time. Shut off gas supply to the torch. Place the included rain cap over on top of the torch. If additional protection is desired, a cover may be placed over the torch, making sure it does not damage the glass.

To register your TRAVIS INDUSTRIES, INC. 1 Year Limited Warranty, complete the enclosed Warranty card and mail it within ten (10) days of the appliance purchase date to: TRAVIS INDUSTRIES, INC., 4800 Harbour Pointe Blvd. SW, Mukilteo, WA 98275. TRAVIS INDUSTRIES, INC. warrants this gas appliance (appliance is defined as the equipment manufactured by Travis Industries, Inc.) to be defect-free in material and workmanship to the original purchaser from the date of purchase as follows:

Year 1 Parts & Labor Coverage

Burner Assembly: Burner, Venturi, Flame Spreader, Orifice, Gas Control Assembly: Gas valve, cover plate and hardware, thermocouple, pilot hood, pilot gas line, piezo igniter, tip switch and wiring, LP regulator (if applicable)

Glass: Glass (breakage from thermal shock only)

Accessories: Portable base (including post and tank cover), wall mount bracket, in-ground post, and pier post

One-Way Freight Allowance: One-way freight allowance on pre-authorized repair done at factory is covered.

Exclusions: Paint and Finish

This new gas appliance must be installed by a qualified gas appliance technician. It must be installed, operated, and maintained at all times in accordance with the instructions in the Owner's Manual. Any alteration, willful abuse, accident, neglect, alteration, misapplication or misuse of the product shall nullify this warranty.

This 1 Year warranty excludes damage caused by normal wear and tear, such as discoloration. Also excluded is damage to the unit caused by abuse, improper installation, modification of the unit, drilling of the orifices, or the use of fuel other than that for which the unit is configured. Units are shipped for either natural gas or propane. Confirm fuel configuration with your installer.

We want you to love every new item from AuthenTEAK. If something is wrong with your merchandise, know that we are available to assist with refunds and/or exchanges. See below for details.

To help ensure a smooth order process, where your product, lead time, and shipping/delivery expectations are met or even exceeded, please contact us with any questions prior to placing your order. Our customer care team is available by emailing customercare@authenteak.com where we respond between 10 a.m. and 5 p.m. ET, Monday–Friday.

Returns & Exchanges

With proof of purchase, you may return or exchange an eligible item within 30 days of delivery. All returns must be in original condition and packaging. We cannot accept returns for items that have been opened, assembled, altered, used or made to order. AuthenTEAK does not offer free returns and the customer is responsible for all costs associated with returning merchandise. All returns are subject to a 15% restocking fee. If you choose to exchange an eligible item, a portion of the restocking fee may be waived.

If the order was shipped and/or delivered at no charge—including any free White-Glove promotions—the cost of that shipping and/or delivery service will be deducted from any eligible refunds.

All refunds must include a Return Authorization (RA) number. To obtain an RA number and process your refund, please complete the form below. Refunds are processed within one week of receipt and inspection of merchandise.

Final Sale Merchandise

The following merchandise is non-returnable, non-cancellable, and non-refundable:

• Pillows
• Fabric by the Yard
• Furniture Cushions and Casings
• Curtains and Drapes
• Custom Furniture
• Special Order Frame Finshes
• Grills, Smokers, and Pizza Ovens
• Appliances and Kitchen Components
• Kitchen Cabinetry
• Reducer Rings and Umbrella Caps
• Upholstered Furniture
• All Talenti brand products
• Replacement Umbrella Frames, Bottom Poles and Parts
• Replacement Umbrella Canopies
• Planters with Drainage Holes
• Replacement Slings
• SunBrite TV products

Single Chair Purchase Policy – Final Sale

Due to the high cost of outbound shipping and the potential return shipping costs, the following merchandise purchased individually / purchased as a quantity of one (1), is considered FINAL SALE MERCHANDISE and not eligible for return:

• Chairs
• Chaises / Lounge Chairs
• Bar Stools / Bar Height Chairs
• Counter Height Chairs and Stools
• Adirondacks

Pricing

All prices on our website are in U.S. dollars and are subject to any applicable taxes according to state and local laws. Availability, prices, and delivery lead times are subject to change without notice.

There may be unintentional errors in the prices, descriptions, or images of certain merchandise, and we must reserve the right to restrict orders of those items and correct any errors or inaccuracies.

View return policy