Low Boy 30" Round Steel Fire Pit Fire Pit Art

Please be aware of any local ordinances that may restrict or govern the use of this product prior to purchasing.

Warning - Do not transport if hot. Do not place on a wood deck.

The Fire Pit Art Low Boy 30" Round Steel Fire Pit is made to order by Tennessee craftsman in the heartland of America. They are constructed from heavy duty one quarter inch thick mild carbon steel and are the most durable steel fire pit made anywhere. The inner bowl has a high temperature resistant coating and comes with a one and a half inch rain drain. The outer iron oxide patina is maintenance free and the fire pit can be left outside in all weather conditions. Over time and use the patina will mature and darken a few shades and then remain permanent forever. Each unique fire pit is individually numbered by the artist on an attached brass plaque. When using an LP tank, the tank will NOT fit inside the unit.

Options Available:

Wood Burning - Does not include lava rock or media grate.

Natural Gas or Liquid Propane Gas burner kit - Comes complete with fire pit, Stainless Steel HPC PENTA Burner, Lava Rock, Flex Line Kit and Plate. Lava rocks included.

Electric Start - All Weather Electronic Ignition System includes 24 volt AC Transformer, Fire Module, Heat Shield and Install Instructions. Lava rocks included.

Do not tarp your fire pit, the tarp will cause the patina to blacken and stop the oxidation process. In many cases the color of the tarp will transfer to the new steel. During the maturing process keep wet leaves and debris off the piece until the steel matures. Allow the piece to mature with each fire. Sit back, relax and enjoy your new Fire Pit Art®.

After purchasing a fire pit that promptly fell apart and caught the yard on fire, artist Rick Wittrig turned to his wife and said, “I can build a better one.” That’s when Fire Pit Art was born. Handcrafted in Tennessee, Fire Pit Art’s sculptural fire pits are made from heavy-duty, mild-carbon steel, with an outer, iron-oxide patina that’s virtually maintenance-free and only gets better over time. An inner bowl features a high-temperature-resistant coating and 1.5-inch diameter rain drain, allowing these fire pits to be left outside in all weather conditions.

You do not need to do anything to the carbon steel to maintain it's finish. If you would like to smooth out the weathered surfaces, you can use a Scotch Brite pad to gently rub the steel. This will cause some of the rust barrier to break off and fall to the ground. Be sure to thoroughly clean the ground surface after this process. You can use water to clean the surfaces after this process.

Do not get water into any of the burner components. Water in the burner components can cause dangerous back pressure. If you think there is water in the burner components, call a licensed technician to check the burner before use.

Fire Pit with Gas Option

Fire pits should be inspected before initial use and inspected and cleaned at least annually by a qualified field service person. Periodically remove the logs, glass or lava rock and examine the burner. If dirty, clean with a soft brush. Also, examine the area around the Propane/Air Mixer. Any dirt or lint in this area should be removed. This will ensure long life and trouble free operation. When the fire pit is put back in service, check the burner flame patterns; it is imperative that the burner flame characteristics are steady, not lifting or floating. Periodically check the hose connecting the LP gas cylinder to ensure it is not damaged in any way. While the fire pit is not in use, it should be covered to protect it from weather and other adverse elements. Not protecting the fire pit could result in a void of the warranty.

Carbon (soot) may build up on the surfaces of the logs with heavy use. This is more likely to occur when using LP gas. The soot should be cleaned off the surface of the logs periodically to prevent excessive buildup. To clean the logs, be sure the fire is out, the gas supply is turned off and the logs are cool to the touch. The soot can then be brushed off with a dry bristle brush or cloth. Logs can be damaged if mishandled. Dispose of soot and cleaning materials properly. Keep away from clothing, pets and outdoor furniture.

FIRE PIT ART WARRANTY

Fire pits include a 10-year manufacturer’s warranty on Carbon Steel Fire Pits, and a 100-year warranty on Stainless Steel Fire Pits for structural integrity during that time frame for the original purchaser.

Safety Pilot & Latch Tap Valve Kits: 5-year residential, 5-year commercial

Stainless Steel Fire Burners: Hassle-Free Lifetime

Electronic Components and Gas Valves: 3-year residential, 1-year commercial

Stainless Steel Components: 5-year residential, 1-year commercial

Hose and Fittings: 2-year residential, 2-year commercial

Please inquire for specifics on other areas of coverage. 

This warranty does not cover damage or product failure caused by accident, misuse, negligence, tampering, or modifications. Saltwater environments are excluded from this warranty. Fire Pit Art cannot be held responsible or liable for any injury or death caused by the misuse of this product. This warranty does not cover damage caused by either proper or improper use of our products to any surrounding surfaces, structures, or furnishings. This includes, but is not limited to, discoloration or damage to a patio or deck surface, furniture, house, or any other structure.