Travis Industries Tempest Torch Mounts
Item #: TEMP-MOUNTS Internet #: 5090
For a Free Design Consultation or to Order by Phone
The Tempest Torch offers different mounting options. The unit can be mounted using a post or pillar, or can be wall mounted. The Pillar Mount works for columns or pedestals (6" tall) and the Wall Mount is used for entry ways and sides on building. The Deck Mount Post is for installation on decks (94" tall). The In Ground Post is used for installation in ground (buried). If you have questions concerning how or which mount to use please contact us for more information.
Your Tempest torch is designed to be cleaned and maintained easily. The most common maintenance that your torch will require is glass cleaning. This is done by loosening the glass retaining screws. Each piece of glass will have its own retainer. Hold the glass by the exposed edge and slide horizontally out of its tracks, the glass should slide easily if its retainer screw is loose.
Clean with glass cleaner or warm soapy water. The glass on your Tempest is tempered and designed for safety. If it breaks it will shatter into small square pieces similar to a car windshield. It is special glass and if you break one or need to replace a piece use only 3/16" thick tempered glass supplied by your Tempest Torch dealer.
To inspect for or clean debris out of the inside of your torch remove one piece of glass. This will provide access to the inside of your torch. Once your glass piece is out remove the pyramid shaped piece with the rings on the top by lifting it straight up, once you are clear of the burner elements turn it sideways and remove through the glass opening. This will provide you a clear view of all the torch components, visually check for and remove all foreign objects, vegetation, bugs , debris. When reassembling make sure you orient the Pyramid plate correctly, the burner elements that stick up through this plate are delicate. Once oriented, slide the plate straight down onto the burner assembly making sure the edges are seated all the way down.
Winterizing the Torch
These procedures only apply to areas where the torch will not be used during winter or for a long period of time. Shut off gas supply to the torch. Place the included rain cap over on top of the torch. If additional protection is desired, a cover may be placed over the torch, making sure it does not damage the glass.
Assembly: Minor assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.
If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.
Year 1 Parts & Labor Coverage
Burner, Venturi, Flame Spreader, Orifice, Gas Control Assembly: Gas valve, cover plate and hardware, thermocouple, pilot hood, pilot gas line, piezo igniter, tip switch and wiring, LP regulator (if applicable)
Glass (breakage from thermal shock only)
Portable base (including post and tank cover), wall mount bracket, in-ground post, and pier post
One-Way Freight Allowance:
One-way freight allowance on pre-authorized repair done at factory is covered.
Paint and Finish
This new gas appliance must be installed by a qualified gas appliance technician. It must be installed, operated, and maintained at all times in accordance with the instructions in the Owner's Manual. Any alteration, willful abuse, accident, neglect, alteration, misapplication or misuse of the product shall nullify this warranty.
This 1 Year warranty excludes damage caused by normal wear and tear, such as discoloration. Also excluded is damage to the unit caused by abuse, improper installation, modification of the unit, drilling of the orifices, or the use of fuel other than that for which the unit is configured. Units are shipped for either natural gas or propane. Confirm fuel configuration with your installer.
Questions & Answers
Typical questions asked about products:
- • Is the item durable?
- • Is the item easy to use?
- • What are the dimensions of this item?
Free Shipping On All Swatches
Click to select the desired swatches. Once you have made your selection, click the "Reqeust Swatches" button below and proceed through checkout.
You've chosen 0 out of 3 free swatches.
One swatch order valid per customer.