Travis Industries Tempest Torch
Item #: TEMP-949007X Internet #: 5088
For a Free Design Consultation or to Order by Phone
Travis Industries Tempest Torch
Quick Ship Manual NG ships late July. All others ships next business day.
Transformer is required to power the Electronic Ignition Head. Transformer can power up to 6 heads.
- Choose NG or LP and either manual or electronic ignition start
- Torch includes gas valve, burner, igniter, glass panels and frame
- This product is not eligible for White Glove Delivery
- Transformer is required to power the Electronic Ignition Head and it's sold separately. Transformer can power up to 6 heads.
The Tempest Torch by Travis Industries creates a distinctive source of outdoor lighting for patios, decks and landscapes. The torch features a natural gas 20,000 - 14,000 BTU burner. It is constructed of tempered glass and the majority of steel components are made of 16 gauge 304 stainless steel. The electronic ignition model is fueled by natural gas and liquid propane and is controlled by a wall switch control. This unit can also be used in conjunction with a programmable timer or controlled via a Smart Home system. The manual ignition model has an easy access control panel with a single on/off and flame height controller, as well as a safety shut off switch. This model comes with a rain cap which protects the flame in uncovered locations. The Tempest Torch can be post mounted, pillar mounted or mounted on your outdoor wall or structural support to provide a handsome decorative element that also illuminates. The Pillar Mount works for columns or pedestals (6" tall) and the Wall Mount is used for entry ways and sides on building. The Deck Mount Post is for installation on decks (94" tall). The In Ground Post is used for installation in ground (buried). If you need additional mounts please refer to the Travis Industries Tempest Torch Mounts.
Both the Deck Post and the In-ground post can be cut to alter the height of the installation. Note you will have to replace the pilot holes on the cut end to align with the torch head or deck mount
Tempest Torch Transformer powers up to six electronic torches. Transformer box is required to power the 2019 and newer electronic ignition torch. Operating a manual ignition torch does not require a transformer. Transformer is sold separately.
The Tempest Torch comes as a standard base unit (a.k.a Torch Head) that includes gas valve, burner, igniter, glass panels, rain cap and frame.
For more information on installation and frequently asked questions, please visit our Travis Industries FAQs page.
Your Tempest torch is designed to be cleaned and maintained easily. The most common maintenance that your torch will require is glass cleaning. This is done by loosening the glass retaining screws. Each piece of glass will have its own retainer. Hold the glass by the exposed edge and slide horizontally out of its tracks, the glass should slide easily if its retainer screw is loose.
Clean with glass cleaner or warm soapy water. The glass on your Tempest is tempered and designed for safety. If it breaks it will shatter into small square pieces similar to a car windshield. It is special glass and if you break one or need to replace a piece use only 3/16" thick tempered glass supplied by your Tempest Torch dealer.
To inspect for or clean debris out of the inside of your torch remove one piece of glass. This will provide access to the inside of your torch. Once your glass piece is out remove the pyramid shaped piece with the rings on the top by lifting it straight up, once you are clear of the burner elements turn it sideways and remove through the glass opening. This will provide you a clear view of all the torch components, visually check for and remove all foreign objects, vegetation, bugs , debris. When reassembling make sure you orient the Pyramid plate correctly, the burner elements that stick up through this plate are delicate. Once oriented, slide the plate straight down onto the burner assembly making sure the edges are seated all the way down.
Winterizing the Torch
These procedures only apply to areas where the torch will not be used during winter or for a long period of time. Shut off gas supply to the torch. Place the included rain cap over on top of the torch. If additional protection is desired, a cover may be placed over the torch, making sure it does not damage the glass.
|Fuel Type||Natural Gas or Liquid Propane|
|Ignition Type||Manual or Electric Ignition|
|Floor Clearance to Combustibles||2.5" combustible floor to bottom.|
|Wall Clearance to Combustibles||8" measured from glass surface.|
|Ceiling Clearance to Combustibles||26" measured from the torch top (glass frame) with or without the rain cap. (Refer to the Owner’s Manual for further details.)|
|Gas Rating on High||NG- 20,000 BTUs/hr; LP- 20,000 BTUs/hr|
|Gas Rating on Low||NG- 14,000 BTUs/hr; LP- 17,000 BTUs/hr|
|Electronic Ignition Transformer||Powers up to 6 torches required if choosing electronic ignition.|
|Voltage Setting||This transformer has three different voltage leads: 24v; 26v; and, 28v. Refer to the wire length charts (either direct-run or daisy-chain) to determine which voltage lead you should use.|
Tempest Torch Brochure
Tempest Torch Electronic Ignition Owners Manual
Tempest Torch Electronic Ignition Transformer Manual
Tempest Torch Manual Light Owners Manual
Tempest Torch Wall Mount Instructions
Tempest Torch Pillar Mount Instructions
Tempest Torch Deck Mount and Post Instructions
Tempest Torch In Ground Post Instructions
Tempest Torch Warranty Sheet
To register your TRAVIS INDUSTRIES, INC. 1 Year Limited Warranty, complete the enclosed Warranty card and mail it within ten (10) days of the appliance purchase date to: TRAVIS INDUSTRIES, INC., 4800 Harbour Pointe Blvd. SW, Mukilteo, WA 98275. TRAVIS INDUSTRIES, INC. warrants this gas appliance (appliance is defined as the equipment manufactured by Travis Industries, Inc.) to be defect-free in material and workmanship to the original purchaser from the date of purchase as follows:Year 1 Parts & Labor Coverage
Burner Assembly: Burner, Venturi, Flame Spreader, Orifice, Gas Control Assembly: Gas valve, cover plate and hardware, thermocouple, pilot hood, pilot gas line, piezo igniter, tip switch and wiring, LP regulator (if applicable)
Glass: Glass (breakage from thermal shock only)
Accessories: Portable base (including post and tank cover), wall mount bracket, in-ground post, and pier post
One-Way Freight Allowance: One-way freight allownce on pre-authorized repair done at factory is covered.
Exclusions: Paint and Finish
This new gas appliance must be installed by a qualified gas appliance technician. It must be installed, operated, and maintained at all times in accordance with the instructions in the Owner's Manual. Any alteration, willful abuse, accident, neglect, alteration, misapplication or misuse of the product shall nullify this warranty.
This 1 Year warranty excludes damage caused by normal wear and tear, such as discoloration. Also excluded is damage to the unit caused by abuse, improper installation, modification of the unit, drilling of the orifices, or the use of fuel other than that for which the unit is configured. Units are shipped for either natural gas or propane. Confirm fuel configuration with your installer.
Questions & Answers
Typical questions asked about products:
- • Is the item durable?
- • Is the item easy to use?
- • What are the dimensions of this item?
Free Shipping On All Swatches
Click to select the desired swatches. Once you have made your selection, click the "Reqeust Swatches" button below and proceed through checkout.
You've chosen 0 out of 3 free swatches.
One swatch order valid per customer.