The heaters are constructed using stainless steel and high temperature coated paint to help ensure maximum life in the outdoor environment. To maximize the life of the heater it is important that frequent cleaning is performed and appropriate care is taken. Control compartment, burner and circulation air passageways of the heater must be kept clean. Inspect and clean at least every six months or more frequently in adverse conditions. Bromic recommends the following:
Always install with the corresponding Bromic heat shield and clean according to Bromic instructions. Clean the heater weekly during regular use and at least monthly when not in use. In a salt-air environment, such as near the ocean, cleaning is recommended more frequently. Heaters must not be cleaned with cleaning products that are combustible or corrosive. Over prolonged use may cause slight discoloration of painted surfaces. This is normal and does not effect the operation of the appliance. Bromic uses specialized high temperature paints and as such re-painting should not be attempted. Replacement parts can be purchased to restore the heater to its original appearance from Bromic Pty Ltd. (Refer to parts list in Bromic Manual
Bromic outdoor radiant heaters require regular servicing to maintain efficient operation. The heaters are used on a cyclical basis however are exposed to the external elements continuously (both during periods of use and whilst remaining idle). Regular servicing is therefore required to ensure trouble free operation. All maintenance should be carried out ONLY by authorized service personnel. Servicing is recommended at the commencement of each winter season and more frequently in adverse conditions. Please refer to the Bromic Manual
for the standard Bromic servicing instructions.