Bromic Heating Platinum Smart-Heat 2300w Electric Patio Heater Series II
Item #: BH032000x Internet #: 1008
Rollover image to zoom in
For a Free Design Consultation or to Order by Phone
Call: 1-866-360-8325
Bromic Heating Platinum Smart-Heat 2300w Electric Patio Heater Series II
Ships in 1 - 3 weeks. Lead times may vary based on product availability. Inquire for specifics.
- The designers choice for a modern electric infrared patio heater
- Choose from a Black or Matte White frame finish
- Heats approximately 65 sq. ft.; 230-240V/9.6A power connection
- W33 in. x D7 in. x H2 in.; 17 lbs
Product Overview
Bromic Heating's Platinum Smart Heat Electric Patio Heater Series II blends style and function into a never seen before 2,300 Watts infrared heater, providing efficient directional warmth for both commercial and residential outdoor spaces. The heater has a corrosion-resistant, high temperature coating available in matte black, and a tamper-proof electrical wiring enclosure to help extend its life and quality. Included with each patio heater is an easy pivoting wall/ceiling mount. This adjustable mount allows for movement of the patio heater, targeting the direction of heat towards a specific location, while a spectral reflector distributes warming radiant heat evenly.
Bromic Electric Heaters operate using a 220V/9.2A power connection and are typically operated with smart system controls to create custom heating preferences. The next generation infrared heating element tubes are frosted to reduce the harsh glare, producing a warm and attractive amber glow. Optional Wireless ON/OFF control switch unit allows the power output of the heater to be turned on/off, impulsive or timer controlled up to 8 hours, 59 minutes and 59 seconds. The wireless control is enclosed in a protective box and can be used with 110 - 230VAC supply voltages. Can control two 3000W heaters at 230VAC (1500W at 110VAC). Includes 4-channel remote. Read the Bromic On/Off Manual for more information. Electric heaters also have the option for a Wireless Dimmer control switch, allowing customers unprecedented control over heating output. This unit allows the power output of a heater to be adjusted for perfect comfort, with the ability to adjust multiple units in unison with a single remote. Each Tungsten Electric Smart-Heat Wireless Dimmer Control can manage up to 6500W of heating and can be used in 120VAC, 208VAC and 240VAC applications. Enclosed within an IP54-rated protective casing, a 7-channel transmitter allows users to dim or brighten their heaters at the touch of a button, offering customizable comfort and exceptional reliability. Read the Bromic Dimmer Manual for more information.
Additional product details may be found by reading the Bromic Manual. This helpful manual includes technical specifications, installation/mounting recommendations, a pre-install checklist, maintenance & care info and the manufacturer warranty.
Features:
- Heats approximately 65 sq. ft.
- 2,300 Watts
- Full Stainless Steel Construction
- Wind resistant to 8 mph
- Automatic "Smart" Re-Ignition
- 220v / 9.2A Power Connection
- One year manufacturer's warranty
- Surface ceiling/wall adjustable mount included
- Water/Splash Resistant
Bromic Manual
Bromic Heating Catalog
Bromic On/Off Manual
Bromic Dimmer Manual
Bromic Room Planning Guide
Bromic FAQ
Bromic recommends the following:
Always install with the corresponding Bromic heat shield and clean according to Bromic instructions. Clean the heater weekly during regular use and at least monthly when not in use. In a salt-air environment, such as near the ocean, cleaning is recommended more frequently. Heaters must not be cleaned with cleaning products that are combustible or corrosive. Over prolonged use may cause slight discoloration of painted surfaces. This is normal and does not effect the operation of the appliance. Bromic uses specialized high temperature paints and as such re-painting should not be attempted. Replacement parts can be purchased to restore the heater to its original appearance from Bromic Pty Ltd. (Refer to parts list in Bromic Manual).
Servicing
Bromic outdoor radiant heaters require regular servicing to maintain efficient operation. The heaters are used on a cyclical basis however are exposed to the external elements continuously (both during periods of use and whilst remaining idle). Regular servicing is therefore required to ensure trouble free operation. All maintenance should be carried out ONLY by authorized service personnel. Servicing is recommended at the commencement of each winter season and more frequently in adverse conditions. Please refer to the Bromic Manual for the standard Bromic servicing instructions.
| Width | 33 in. |
| Depth | 7 in. |
| Height | 2 in. |
| Weight | 16.5 lbs |
| Heat Coverage | 65 sq. ft. |
| Watts | 2300 WATTS |
| Voltage | 230-240 V |
| BTU Range | N/A |
| Amp Rating | 9.6A |
| Mount Height | 6 - 8 ft. |
Assembly: Minor assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.
If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.
Resources
Warranty
Questions & Answers
Typical questions asked about products:
- • Is the item durable?
- • Is the item easy to use?
- • What are the dimensions of this item?
Customer Reviews
Do you own this product? Be the first to rate it.
Your feedback will help customers like you make informed decisions and will help us to improve our product offerings!
If you have any questions regarding the customer service you received, please contact us
Write the first review
Free Shipping On All Swatches
Click to select the desired swatches. Once you have made your selection, click the "Reqeust Swatches" button below and proceed through checkout.
You've chosen 0 out of 3 free swatches.
One swatch order valid per customer.