- Main image shown with Meteor frame
- Premium hard-wearing dining chair featuring a powder coated aluminum frame
- Gently curved back panel for perfect ergonomics
- Comes fully assembled
Shop Gloster before prices increase January 1st, 2023.
Shopping for a Client?
Unlock your trade benefits
Covered by the Gloster warranty.
Contact us for assistance, a free design consultation or to order by phone.
|Arm Height||25.50 in|
|Designed By||Henrik Pedersen|
|Seat Height||18.50 in|
|Cushion Fill||Reticulated Foam with flow-thru liner|
|Furniture Material||Aluminum, Sling|
Comfortable, practical and stylish. The Allure Stacking Dining Chair features a hard-wearing, powder coated aluminium frame with a solid aluminium back panel that is gently curved for perfect ergonomics. The Allure Dining Arm Chair is available in Meteor and White.
Note: All Gloster furniture is factory tested to support a weight of 300 lbs.
Available in a wide variety of designs and colors, Sling is a generic term for a woven, open-mesh fabric made from a vinyl coated, high strength polyester yarn. For Gloster sling furniture they use only the highest quality Textilene and Batyline woven vinyl.
Historically, slings are found combined with powder-coated aluminum frames. However, due to its inherent good looks, exceptional comfort and practicality, Gloster also has designed products that combine sling with both teak and stainless steel frames. One of the main benefits of sling is comfort. When stretched taught between two side frames, sling provides a yielding seating surface that moulds to your individual body shape. Gloster's Textilene and Batyline woven vinyl is resistant to fading, mildew and wear & tear under even the most severe weather conditions.
Gloster Slings are made exclusively of high-performance Ferrari Batyline slings, a PVC coated polyester yarn. Each yarn contains a polyester core, over which a colored PVC coating is extruded. Ferrari sling is most well-known for its patented system of pre-tensioning of the sling, which prevents sagging. All Ferrari slings are also Phthalate free. PVC is impervious to UV, chlorine, salt and most other pollutants and contaminants, and it is also easy to maintain and clean.Cleaning Sling
The process of powder coating involves a lengthy pre-treatment process. First, the material is thoroughly sanded with abrasive paper much in the same way that wood is sanded. Then the frames and components are immersed in a series of chemical baths to clean and degrease the metal before the corrosion resistance of the aluminium is enhanced by pre-treating with a chrome conversion coating that deposits a thin layer of chrome on the surface. The powder coat (normally this is Polyester) is then applied using electrostatic spraying equipment. A thin layer of powder is deposited over the entire frame before the frame is put into an oven at approximately 200°C (392°F) for 15-20 minutes, depending on the size of the component. The advantage of using powder coat over a paint finish is that the coating is harder and can be thicker than that of paint. Also, there are no solvents involved. The disadvantage of powder coat over paint finishing is that powder coat is very difficult to repair if it becomes damaged. It is not possible to perfectly match the appearance of powder coat with a repair made using a liquid paint.Cleaning Aluminum
Lets Make it (Email) Official
Become an AuthenTEAK Insider and be first to know about new collections, exclusive sales, and special offers.