zoom inClick to Zoom

Ambient Pebble Small Table Lamp

SKU#: GL-101384-x    ID#: 8382
with Free Shipping
white glove delivery

White Glove Delivery Available

How does it work? 

Shopping for a Client?
Unlock your trade benefits

WarrantyCovered by the Gloster warranty.

Contact us for assistance, a free design consultation or to order by phone.

About this Item

Highlights

  • Main image shown with Carbon base and Meteor shade
  • Lamp made of solid stone with outdoor leather base
  • Powder coated aluminum & polypropylene shade
  • Solar and main power rechargeable LED light unit

Specifications

Depth6.50 in
Width6.50 in
Height12.00 in
Lumens (LED only)100 min - 180 max 
Weight5.00 lbs
Diameter6.50 in
DimmableYes 
ExposurePartial Exposure (Half Sun) 
IP RatingIP65 
Power SourceBattery Operated, Solar Powered 
Bulb IncludedYes 
Lighting TypeLamps And Lanterns, Solar Lighting 
Number of Bulbs2.0000 
Lighting Base MaterialLeather, Stone 
Lighting Shade MaterialAluminum, Polypropylene 

Description

Set the mood outdoors with the Gloster Ambient Pebble Small Table Lamp. This contemporary Danish design features a sturdy solid stone base with a leather base plate. The shade is made of powder-coated aluminium and polypropylene, providing a tough finish. Ideal for outdoor conditions, this finish is knock and scratch resistant, water-resistant, highly resistant to corrosion, and easy to clean. This lamp offers solar and mains power output with a rechargeable LED light unit. It can be operated by remote control and has eight light output settings, with a battery life of approximately 4 hours on maximum light setting. Control your lighting at a working distance of up to 65ft via remote control.

At A Glance

  • No Assembly RequiredNo Assembly Required
  • Solar Poweredsolar powered
  • Battery Operatedbattery operated
  • Partial Exposurepartial exposure

Product Protection

Material Properties
Aluminum is a light and tough metal with an excellent strength to weight ratio and corrosion resistance - making it an ideal material for outdoor furniture. The aluminum is coated with an electro-statically applied, powder coat finish. The electro-static application method ensures 100% coverage of the metal’s surface area and provides a consistent and tough finish that far exceeds other conventional paint finishes. The resulting finish is knock and scratch resistant, impervious to moisture, highly resistant to corrosion and easy to clean.

The process of powder coating involves a lengthy pre-treatment process. First, the material is thoroughly sanded with abrasive paper much in the same way that wood is sanded. Then the frames and components are immersed in a series of chemical baths to clean and degrease the metal before the corrosion resistance of the aluminum is enhanced by pre-treating with a chrome conversion coating that deposits a thin layer of chrome on the surface. The powder coat (normally this is Polyester) is then applied using electrostatic spraying equipment. A thin layer of powder is deposited over the entire frame before the frame is put into an oven at approximately 200°C (392°F) for 15-20 minutes, depending on the size of the component.

The advantage of using powder coat over a paint finish is that the coating is harder and can be thicker than that of paint. Also, there are no solvents involved. The disadvantage of powder coat over paint finishing is that powder coat is very difficult to repair if it becomes damaged. It is not possible to perfectly match the appearance of powder coat with a repair made using a liquid paint.

Cleaning
Powder coated aluminum should require very little maintenance, other than to gently clean with water and a mild liquid detergent to remove any dirt or splashes. A microfiber cloth or sponge should be used to wipe over the surfaces of the furniture. Removing surface water with a drying cloth (like you would use on your car) will help avoid water spots. Avoid using any abrasive cleaning agents or materials, as these could mark the surface of the powder coat. Do not use steel wool or Scotchbrite on powder coated surfaces.