Cleaner Instuctions:
1. Before using this product, eye protection and rubber gloves should be worn. Cover the ground under your working area before
cleaning.
2. On upholstery: Test for colour fastness in an inconspicuous area before using.
3. This cleaner is ready to use.
4. Moisten the surface to be treated thoroughly with water beforehand.
5. Spray the cleaner onto the wet, stained area and let it soak in for 3 minutes.
6. Remove dirt and grease with the scrubbing pad supplied. Afterwards, rinse the treated surface thoroughly with clean water and allow
to dry.
7. Once dry, use our protector to make the treated surface water repellent again.
Sealer Instructions:
1. Before using this product, eye protection and rubber gloves should be worn. Cover the ground under your work area before starting.
2. On new teak: First use Gloster cleaner to help remove the natural teak oils on the surface of the teak.
3. Dirty teak: First use Gloster cleaner to remove all dirt & stains.
4. If cleaned wood feels rough, sand lightly before treating. Make sure the wood is 100% dry and free of dust before application of sealer.
5. Shake the sealer for at least one minute before use.
6. Try sealer on a small invisible area first to judge if the colour meets your expectations.
7. Apply a very thin layer of protector evenly over the furniture with the cloth supplied. Apply a second thin coat after 30 minutes drying time.
8. Re-treat your teak at least once a year.
Protector Instuctions:
1. Before using this product, eye protection and rubber gloves should be worn. Cover the ground under your work area before starting.
2. On new teak: first use Gloster cleaner to help remove the natural teak oils on the surface of the teak.
3. On dirty fabrics/teak: first use Gloster cleaner to remove all stains. Allow to dry completely.
4. This protector is ready to use. Shake for at least one minute before use.
5. Spray directly onto the surface in such a way that the surface is soaked completely and then let it dry for 4 hours.
6. Repeat this application and allow to dry completely for 48 hours before further use.
7. It is recommended that you repeat the treatment with the protector once a year (teak table tops twice a year).