zoom inClick to Zoom

SL-Series Single Element Electric Patio Heater 2400 Watt - 42.5"

SKU#: AEI-SL-24XX    ID#: 2468
with Free Shipping
with Free Shipping

Shopping for a Client?
Unlock your trade benefits

WarrantyCovered by the Infratech warranty.

Contact us for assistance, a free design consultation or to order by phone.

About this Item

Highlights

  • Sleek, narrow profile single element infrared patio heater
  • Brushed stainless trim with optional dark contrasting housing
  • Energy efficient with 49 sq. ft. heat coverage area, UL listed

Specifications

BTUs8192 
Watts2400 
Width7.00 in
Height8.00 in
Length42.50 in
Weight15.00 lbs
Voltage208V/240V/277V 
Amp Rating11.5A/10A/8.7A 
Hidden TankNo 
Heating FuelElectric 
Mount Height7 ft - 9 ft 
Heater MaterialStainless Steel 
Heat Coverage Area50 sq. ft. or less 

Description

Infratech's SL-Series Single Element Heater has 2400 watts and more than 8,100 BTUs of heating warmth. The unit is 42.5" long and will heat a 49 square foot area when mounted from seven to nine feet high. Available in three voltage options, we recommend professional installation on your covered outdoor wall or ceiling. The unit comes with a T-channel and mounting brackets and when fully installed, blends seamlessly into your outdoor decor. Choose from a bronze, stainless steel or matte black finish which can withstand years of outdoor use and all kinds of weather conditions. You can also choose an optional control unit for your heater with an input regular, on/off switch and timer.

Features:

  • Area Heated 7' x 7' at 7-9 Ft High
  • BTU's 8,192
  • Two year manufacturer's warranty
  • A surface ceiling/wall mount is included

California Resident Proposition 65 Information

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov/.

At A Glance

  • Assembly Requiredassembly required
  • Electricelectric heating fuel

Product Protection

Before performing any maintenance, power must be disconnected and the heater cool to touch. Heater housing, reflector and heating element can be rinsed with a hose or wiped down with isopropyl alcohol, acetone, or glass cleaner, using a clean, scratch-free rag or paper towel. Any oxidation, surface rust or discoloration can be removed with stainless steel cleaner or metal polish on the bare metal surface. Make sure all water, solvents or cleaners are removed and the heater is dry before reconnecting power.