Patio Comfort NG Outdoor Patio Heater - Stainless Steel

Item #: NPC05-SPP     Internet #: 3595

Rollover image to zoom in

Patio Comfort NG Patio Heater - Stainless Steel - img. 3
Patio Comfort NG Patio Heater - Stainless Steel
Patio Comfort NG Patio Heater - Stainless Steel - img.  2

For a Free Design Consultation or to Order by Phone
Call: 1-866-360-8325

Patio Comfort NG Outdoor Patio Heater - Stainless Steel

Item #: NPC05-SPP     Internet #: 3595
$828.00 $909.00

Shipping Time Frame Ships in approximately 24 weeks.

White Glove Delivery Available

  • Provides clean draft free circle of radiant heat
  • Includes 12 ft. hose, two brass quick couplers, and brass safety shut off valve.
  • Auto-off tilt protection
  • Includes a natural gas regulator
  • D 20.5 - 34 in. x H 93 in. ; 60 lbs.

Customize Your Product

Add Optional Cover:   *

Ships in approximately 24 weeks.

$828.00 $909.00
$828.00 $909.00

Shopping for a Client? Apply for Trade benefits.

Product Overview

Patio Comfort's portable Natural Gas (NG) Patio Heater in Stainless Steel is up to the minute in design and technology. It is powered with 41,500 BTUs and broadcasts radiant heat over a 10 to 15 foot diameter area keeping you and your family warm on even the coolest nights. Natural gas burns cleanly and is a constant fuel supply so you never have to change a propane tank or run out of fuel. All parts are stainless steel, solid brass and anodized aluminum which weather well and create a handsome profile on your patio. The unit comes with a natural gas regulator as well as a complete hook-up kit including a 12' vinyl wrapped hose, two quick couplers and shut off valve.

Special Features

  • Provides clean draft free circle of radiant heat
  • Convenient piezoelectric "matchless" ignition system
  • Solid brass gas valve with 100% safety shut off control
  • Commercial Warranty - 120 limited warranty
  • Hook up kit included natural gas pressure regulator
  • All 403 series stainless steel burner and emitter grid
  • Gas train and hose set are pre-assembled
  • All fasteners are 304 series stainless steel
  • Reflector is one piece anodized aluminum
  • All steel components are polyurethane powder coated
  • UL Listed - USA and Canada under CSA 5.90
  • 34 inch one-piece anodized aluminum reflector
  • Up to a 10-15 foot radiant circle of heat
  • Oxygen depletion sensor (ODS) that will shut the unit off if there is inadequate oxygen in the area
  • Auto-off tilt protection that will shut the patio heater off if it is tilted over 30 degrees
  • Safety pilot system to stop the flow of gas if the burner goes out

For assembly instructions, care, use and safety information please download the NPC05 Manual. We also provide additional details on the in-ground installation through the NPC05 Installation Guide.

Your heater has been produced from highly weather resistant materials and only requires minimum cleaning and maintenance. Cleaning must be performed when the heater is cold. Your patio heater will last longer if it is cleaned and maintained properly. It is very important that the air required for the combustion process is not blocked going to the burner. Orifices, burner venturis, vents, and other openings must be kept free of dirt and spider webs.

Stainless steel does not "rust," however varying atmospheric conditions; areas with acid rain, beach and ocean areas with heavy misty conditions may leave brown deposits on the heater. This is to be expected of any stainless steel product used outdoors.

We recommend washing the outer stainless steel components such as the post and decorative cover and perforated material around the lighting instructions with a mild detergent solution and immediately wiping it clean with a dry soft cloth. The stainless steel can be expected to darken and discolor around the heater head and pan as it sustains extreme temperatures. This is normal and to be expected with any outdoor gas heating or cooking appliance.

Never use a cleaning agent that is flammable or corrosive. Never spray any cleaning product on the emitter grid or burner area. If you purchased a powder-coated model, treat it just like you would any other piece of fine outdoor patio furniture. Wash all painted parts of the heater with a soapy solution and protect it with a coat of automobile car wax a couple of times per year or as required dependent upon your local weather and climate conditions.

If you need to touch up a painted heater only paint the post and base portions. Never paint the emitter grid, lighting instructions, valve or control knob area, or the LP cylinder.

The burner ports must also be kept clear so that the burner burns evenly and the flow of gas is not restricted. If the heater is not performing adequately it will be necessary to check the burner and burner venturi. In a salt air or ocean environment, corrosion and rust occurs at a far greater rate than in non-ocean areas. You will need to more frequently check for corrosion and replace parts as required.

The best protection for the critical heater head is a Patio Comfort cover that has been specifically designed for your heater. A stainless steel protective cleaner such as PGS Stainless Steel Cleaner will help protect the finish of all stainless steel components.
Diameter Base - 20.5 in.; Reflector - 34 in.
Height 93 in.
Weight 60 lbs.
Heat Coverage 100 sq. ft.
BTU 40000
Hidden Tank No
Shipping Method: Ground (For freight terms and services click Shipping Info)
Assembly: Assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.

If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.

Shop all Patio Comfort



Patio Comfort heaters are warranted against any defects in parts for a period of 1 year from the date of purchase with original purchase receipt. We will warranty against structural defects all external stainless steel components (posts, bases, & decorative covers) for 5 Years from date of purchase.

This ONE-YEAR Consumer warranty is only applicable for consumer or residential applications. We offer a 120-day warranty protection for heaters that are used in a commercial or rental application. Commercial warranty does NOT cover emitters, ignition, or burners) or component failure caused by abuse, transportation, or misuse.


Questions & Answers

    Typical questions asked about products:

    • • Is the item durable?
    • • Is the item easy to use?
    • • What are the dimensions of this item?

    Customer Reviews

    Do you own this product? Be the first to rate it.

    Your feedback will help customers like you make informed decisions and will help us to improve our product offerings!

    If you have any questions regarding the customer service you received, please contact us

    Write the first review

    Free Shipping On All Swatches

    Click to select the desired swatches. Once you have made your selection, click the "Reqeust Swatches" button below and proceed through checkout.

    You've chosen 0 out of 3 free swatches.
    One swatch order valid per customer.