Perlick 24" C-Series Beer Dispenser
Item #: PR-HC24TO-4-1x1 Internet #: 3607
For a Free Design Consultation or to Order by Phone
Perlick 24" C-Series Beer Dispenser
Shipping Time Frame Ships within 1 - 2 weeks
White Glove Delivery Available
- 800 BTU/hr capacity delivers commercial grade cooling performance.
- Black tap handle included.
- Audible door alarm warns user if door is held open.
Pour your guests a cold brew with the new C-Series residential beer dispenser! Available in 1- or 2-faucet models, the C-Series residential beer dispenser is built to last with commercial grade electromechanical temperature controller, a heavy duty compressor and stainless steel interior. Stores (1) 1/4 barrel or (2) 1/6 barrels. Portable drainer; no plumbing required. Low profile coupler for "D" system keg valves included. Beer Dispenser temperature 34 degree - 46°F (factory set to 38 degree). Best in Class 700 Btu commercial-grade compressor.
Note: Generation 4 products now feature R600a refrigerant, 800 BTU variable speed compressor delivering commercial grade cooling performance, 6 year full parts and labor warranty, new door alarm to signal when door has been left open, and full-extension smooth glide shelving for easy access.
Use non-abrasive tools to clean stainless steel products. Soft cloths and plastic scouring pads will not harm the steel's passive layer.
Clean with polish lines. Some stainless steels have visible polishing lines or "grain". When visible lines are present, always scrub in a motion parallel to the lines. When the grain cannot be seen, polish in a consistent straight pattern and not in a circular motion.
Use alkaline, alkaline chlorinated or non-chloride containing cleaners. While many traditional cleaners are loaded with chlorides, the industry is providing an ever- increasing choice of non-chloride cleaners. If you are not sure of chloride content in the cleaner being used, contact your cleaner supplier. If your present cleaner contains chlorides, ask your supplier for an alternative. Avoid cleaners containing quaternary salt; it also can attack stainless steel and cause pitting and rusting.
Keep food equipment clean. Use alkaline, alkaline chlorinated or non-chloride cleaners at recommended strength. Clean frequently to avoid build-up of hard, stubborn stains. The single most likely cause of damage is chlorides in the water. Remember, adding heat to cleaners that contain chlorides dramatically increases their effect on stainless steel.
If chlorinated cleaners are used, immediately rinse and wipe equipment and supplies dry. The sooner you wipe standing water, especially when it contains cleaning agents, the better. After wiping equipment down, allow it to air dry. Oxygen helps maintain the stainless steel passive film.
Cleaning the Cabinet Interior/Exterior
NEVER use hydrochloric acid (muriatic acid) on stainless steel. Do not use abrasive cleansers or cloths on any interior or exterior surfaces or removable parts.
Glass panels may be cleaned using any standard glass cleaner available on the market. To clean interior and exterior non-metallic surfaces and removable parts, wash with mild solution of soap and lukewarm water with a little baking soda. Rinse and dry thoroughly. Avoid getting water on the lights, controllers, fan motors and unfinished wood wine rack faces.
Cleaning the Condenser
The condenser (located behind the front grill cover) should be cleaned every three (3) months. Use a soft bristle brush and vacuum to remove dust and lint.
- Width: 24"
- Depth: 24"
- Height: 34"
- Weight (lbs.): 183
For All Residential Ice Makers (H50 & H80 Series). PERLICK warrants to the original purchaser of every new PERLICK refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as specified by PERLICK and upon proper installation and start-up in accordance with the Use & Care Guide supplied with each PERLICK unit. PERLICK’S obligation under this warranty is limited to a period of two (2) years from the date of original installation or twenty seven (27) months after shipment date from PERLICK, whichever occurs first.** The optional Perlick drain pump carries a one year parts and labor warranty. The warranty period begins on the installation date of the drain pump. For warranty validation, be sure to properly register your icemaker at www.Perlick.com.SIX-YEAR PARTS & LABOR WARRANTY
For All Generation 4 Hydro Carbon Undercounter Refrigeration, purchased 1/4/2021 or later. PERLICK warrants to the original purchaser of every new PERLICK refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as specified by PERLICK and upon proper installation and start-up in accordance with the Use & Care Guide supplied with each PERLICK unit. PERLICK’S obligation under this warranty is limited to a period of six (6) years from the date of original installation or seventy-five (75) months after shipment date from PERLICK, whichever occurs first.
Questions & Answers
Typical questions asked about products:
- • Is the item durable?
- • Is the item easy to use?
- • What are the dimensions of this item?
Free Shipping On All Swatches
Click to select the desired swatches. Once you have made your selection, click the "Reqeust Swatches" button below and proceed through checkout.
You've chosen 0 out of 3 free swatches.
One swatch order valid per customer.