Lakeside Dining Arm Chair

SKU#: PW-TLD200    ID#: 10883
zoom inClick to Zoom

Lakeside Dining Arm Chair

SKU#: PW-TLD200    ID#: 10883
with Free Shipping
white glove delivery

White Glove Delivery Available

How does it work? 
with Free Shipping

Shopping for a Client?
Unlock your trade benefits

WarrantyCovered by the Polywood warranty.

Contact us for assistance, a free design consultation or to order by phone.

About this Item

Highlights

  • Main image shown with a Slate Gray finish.
  • Features an arched back for relaxed comfort
  • Optional cushion dries quickly and is resistant to weather, salt, sun, and mold
  • Made of POLYWOOD® lumber, a blend made of sustainable materials.
  • 20-year residential warranty; 3-year commercial warranty.

Specifications

Depth21.38 in
Width18.19 in
Height34.25 in
Weight24.00 lbs
StackableNo 
Seat Height17.06 in
Cushion FillFiberfill 
Country of OriginUSA 
Furniture MaterialMarine Grade Polymer, Recycled Plastic 
Cushion Dimensions (Seat)W=16.5 in. D=20.13 in. H=2.5 in. 

Description

Sit back and relax while dining outside on the patio in the Lakeside Dining Arm Chair. This cottage-inspired chair features subtle curves and a comfortably arched back that shows off a classic look. Pair this all-weather chair with Lakeside Dining Side Chairs and any coordinating POLYWOOD dining table to create a set that fits perfectly with your outdoor decor.

The piece is constructed of genuine POLYWOOD® lumber that is not prone to splinter, crack, chip, peel, or rot and is built to withstand a range of climates including hot sun, snowy winters, and strong coastal winds. There is UV-protectant and color continuously throughout the HDPE material and requires no painting or waterproofing. The frame is easily cleaned with soap, water, and a soft-bristle brush.

The optional high-performance outdoor cushions resist weather, salt, sun, mold, and mildew and are quick-drying and durable.

At A Glance

  • Sustainablesustainable
  • Assembly Requiredassembly required
  • Made In USAMade in USA

Product Protection

Plastic Frame Care

POLYWOOD material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color. Also, a popular method of cleaning is a high pressure power wash. (Not to exceed 1,500 psi, which is the equivalent of a car wash.) The surface characteristics of the product may require the use of a soft bristle brush to get into the creases.

The hardware used in the assembly and construction of our furniture is an 18-8 commercial grade stainless steel that has an additional Xylan protective and cosmetic coating. Although the quality of the hardware has a high level of corrosive resistance, the hardware can show some sign of corrosion in salt air environments.

A practical solution to these signs of corrosion would be to wash the product with soap and water. Use a soft bristle brush to scrub the corroding areas of the hardware. Also, use appliance touch up paint in the appropriate color to protect the hardware. Appliance touch up paint can be purchased at local hardware stores.

Cushion Care

POLYWOOD's cushions are made using high quality 100% solution-dyed acrylic or acrylic blended Sunbrella fabrics, and the finest outdoor foam and fiberfill. Fabrics have been factory treated to resist stains and mildew. Regular cleaning with mild soap and water using a sponge or soft brush is recommended. To remove mildew stains, use a solution of one cup bleach and one half cup laundry detergent mixed in a gallon of warm water. Apply solution to the seating surface, allow to soak for ten minutes, thoroughly rinse and allow to air dry before using. Cushions will dry at a much faster rate when removed from the frames and placed on their sides or edges.