Polywood Traditional 48" Garden Glider

With the Polywood Traditional 48" Garden Glider, you never need to worry about maintenance or the seat getting too hot to sit on. That's because this four foot glider is made from Polywood, a dimensionally stable lumber product that is made from recycled plastics that stay cool to the touch, never needs painting and is completely waterproof. This all-weather glider comes in seven handsome traditional colors and is also available with an optional Revolution or Sunbrella cushion.

Optional all-weather bench cushions are available in a variety of Revolution or Sunbrella solution-dyed acrylic fabrics. We offer the complete line of all Polywood collections; for the entire catalog please review the Polywood Catalog under the Resources section for additional information.

Note: All Polywood products are ASTM and BIFMA tested to withstand 300 lbs. per seat.

Plastic Frame Care
POLYWOOD material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color. Also, a popular method of cleaning is a high pressure power wash. (Not to exceed 1,500 psi, which is the equivalent of a car wash.) The surface characteristics of the product may require the use of a soft bristle brush to get into the creases.

The hardware used in the assembly and construction of our furniture is an 18-8 commercial grade stainless steel that has an additional Xylan protective and cosmetic coating. Although the quality of the hardware has a high level of corrosive resistance, the hardware can show some sign of corrosion in salt air environments.

A practical solution to these signs of corrosion would be to wash the product with soap and water. Use a soft bristle brush to scrub the corroding areas of the hardware. Also, use appliance touch up paint in the appropriate color to protect the hardware. Appliance touch up paint can be purchased at local hardware stores.

Cushion Care
POLYWOOD's cushions are made using high quality 100% solution-dyed acrylic or acrylic blended Sunbrella fabrics, and the finest outdoor foam and fiberfill. Fabrics have been factory treated to resist stains and mildew. Regular cleaning with mild soap and water using a sponge or soft brush is recommended. To remove mildew stains, use a solution of one cup bleach and one half cup laundry detergent mixed in a gallon of warm water. Apply solution to the seating surface, allow to soak for ten minutes, thoroughly rinse and allow to air dry before using. Cushions will dry at a much faster rate when removed from the frames and placed on their sides or edges.

• Arm Height: 24.75"
• Seat Height: 17"
• Width: 47.50"
• Depth: 24.25"
• Height: 34"
• Weight (lbs.): 73