Sunglo Portable LP Heater - Bronze

ITEM #: SG-A270BZ


For a Free Design Consultation or to Order by Phone
Call: 1-866-360-8325

Sunglo Portable LP Heater - Bronze

ITEM #: SG-A270BZ

$1,512.00 $1,680.00

Ships within 1 week


Select Wheel Kit *

Free Shipping on All Orders

Ships within 1 week

$1,512.00 $1,680.00
$168.00
$1,512.00 $1,680.00
$168.00

The Sunglo Portable Liquid Propane (LP) Heater in Bronze handsomely warms your patio or terrace with infrared heat distributed via the large aluminum reflector. It features a battery operated pilot ignition with constant pilot. The outdoor heater has a base compartment for the twenty pound liquid propane tank which will allow you to enjoy heat for up to six hours on a full tank. This portable outdoor heater is made with heavy duty, corrosion resistant construction and is made entirely in the U.S.A. It features a 100% safety shut off and has a primary aerated burner which keeps the unit quiet. When ordering more than one, figure on 12' between units for maximum coverage and comfort.

Features:

  • 40,000 BTU
  • Heavy Duty Corrosion Resistant Construction
  • 100% Safety Shut off
  • Battery Operated Ignition System
  • Constant Pilot
  • CSA Certified
  • Approximate 12' Heat Coverage
  • Complete Parts Availability and Support
  • Made in the USA

For assembly instructions, care, use and safety information please download the SunGlo A270 Manual. For specs and additional features download the SunGlo A270 Spec Sheet.

Your heater has been produced from highly weather resistant materials and only requires minimum cleaning and maintenance. Cleaning must be performed when the heater is cold. Your patio heater will last longer if it is cleaned and maintained properly. It is very important that the air required for the combustion process is not blocked going to the burner. Orifices, burner venturis, vents, and other openings must be kept free of dirt and spider webs.

Stainless steel does not "rust," however varying atmospheric conditions; areas with acid rain, beach and ocean areas with heavy misty conditions may leave brown deposits on the heater. This is to be expected of any stainless steel product used outdoors.

We recommend washing the outer stainless steel components such as the post and decorative cover and perforated material around the lighting instructions with a mild detergent solution and immediately wiping it clean with a dry soft cloth. The stainless steel can be expected to darken and discolor around the heater head and pan as it sustains extreme temperatures. This is normal and to be expected with any outdoor gas heating or cooking appliance.

Never use a cleaning agent that is flammable or corrosive. Never spray any cleaning product on the emitter grid or burner area. If you purchased a powder-coated model, treat it just like you would any other piece of fine outdoor patio furniture. Wash all painted parts of the heater with a soapy solution and protect it with a coat of automobile car wax a couple of times per year or as required dependent upon your local weather and climate conditions.

If you need to touch up a painted heater only paint the post and base portions. Never paint the emitter grid, lighting instructions, valve or control knob area, or the LP cylinder.

The burner ports must also be kept clear so that the burner burns evenly and the flow of gas is not restricted. If the heater is not performing adequately it will be necessary to check the burner and burner venturi. In a salt air or ocean environment, corrosion and rust occurs at a far greater rate than in non-ocean areas. You will need to more frequently check for corrosion and replace parts as required.

The best protection for the critical heater head is a cover that has been specifically designed for your heater. A stainless steel protective cleaner such as PGS Stainless Steel Cleaner will help protect the finish of all stainless steel components.
  • Base Width: 20"
  • Height: 93"
  • Reflector: 34.5"
Shipping Method: Ground (For freight terms and services click Shipping Info)
Assembly: Miner assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.

If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.
Limited Warranty
Heaters carry a 90-day commercial or one-year residential factory warranty. All heaters are stamped with the date of manufacture. Warranty is limited to repair of heaters at the factory or replacement parts. Any work or repair of this heater must be performed by qualified service personnel.
close

Fabric Swatch Request

Click to select the desired swatches. Once you have made your selection, click the green button below and proceed through check-out. You will not be charged. Five swatches per order. To request more, please call our showroom at 1-866-350-8325.

Your Selected Swatches: