Cleaning and Care for the Powder Coat finish on aluminum frame
To keep furniture looking new, use Soft Scrub or similar non-abrasive products to remove scuff marks and scratches. Use lemon oil for protection and natural soap and water for cleaning. Powder coating is one of the most durable protective coatings available for metal surfaces, but proper care will help prolong the finish. Over time, powder coated finishes exposed to the elements may show signs of weathering such as reduced gloss and slight color loss. A consistent schedule of cleaning the surface will help remove dirt, grime and other surface buildup that may be harmful to the powder coating finish. We do not recommend using chemical cleaners such as Acetone, Mineral Spirits or Lacquer thinners. Any type of chemical that is harmful to the powder coat surface should be removed or cleaned immediately.
Cleaning and Care for Sling
Spot wash dirt with lukewarm water and a mild soap. Rinse thoroughly with clean water, then air-dry. To clean stubborn stains, in a ventilated area, prepare a mild solution of one cup bleach plus two caps full of a natural soap per gallon of water. Spray the en-tire area, and scrub vigorously if necessary. For stubborn stains use a soft bristle brush. Rinse and allow to dry. Do not use pine oil cleaners on cushion or sling fabrics. For Sunbrella fabrics, blot (don’t rub) liquid spills with a clean, dry cloth. For oil-based spills, apply an absorbent such as corn starch, then remove with a straight edge. Spray on a mild cleaning solution of soap (such as Dawn or Woolite) and water. Rinse the fabric thoroughly to remove all soap residue. Air dry.