Tungsten Smart-Heat 300 Series Gas Patio Heater

SKU#: BH021000x-300    ID#: 1013
zoom inClick to Zoom

Tungsten Smart-Heat 300 Series Gas Patio Heater

SKU#: BH021000x-300    ID#: 1013
with Free Shipping

Icon Arrow Up AltCyber Monday: save 10% with code CYBERMONDAY

with Free Shipping

Shopping for a Client?
Unlock your trade benefits

WarrantyCovered by the Bromic Heating warranty.

Contact us for assistance, a free design consultation or to order by phone.

About this Item

Highlights

  • Stylish honeycomb face plate facilitates even heat distribution
  • NG and LP versions reliable in winds up to 11mph or 18 km/h.
  • 26,000 BTUs will heat approximately 120 sq. ft.
  • W19.2 in. x D14 in. x H14.2 in.; 33 lbs

Specifications

BTUs26000 
Depth14.09 in
Width19.29 in
Height14.25 in
Weight33.00 lbs
WheelsWithout Wheels 
Hidden TankNo 
Heating FuelLiquid Propane, Natural Gas 
Mount Height8 ft 
Ignition TypeElectronic Ignition 
Heater MaterialStainless Steel 
Heat Coverage Area101 sq. ft. or more 
Accesories IncludedSurface ceiling/wall adjustable mount 

Description

Bromic Tungsten Smart-Heat 300 Patio Heaters are functionally perfect with a neutral black design aesthetic that is ideal for both residential and commercial applications. These powerful gas patio heaters feature a patented direct ignition system that ensures a reliable start and effective operation. Constructed of stainless steel with a high temperature ceramic coating, these gas patio heaters hold-up well even the harshest outdoor locations. The powerful heating elements ensure efficient heat production in winds of up to 8 mph.

Bromic Gas Heaters operate using either Liquid Propane (LP) or Natural Gas (NG), while generating more heat than electric (220v) patio heaters. Optional Wireless ON/OFF control unit allows the power output of the heater to be turned on/off, impulsive or timer controlled up to 8 hours, 59 minutes and 59 seconds. The wireless control is enclosed in a protective box and can be used with 110 - 230VAC supply voltages. Can control two 3000W heaters at 230VAC (1500W at 110VAC). Includes 4-channel remote. Read the Bromic On/Off Manual for more information.

Optional deflector shield is ideal when mounting in low clearance areas, shielding walls and ceilings from radiant heat by redirecting airflow. See Spec Sheet for details.

Additional product details may be found by reading the Bromic Manual. This helpful manual includes technical specifications, installation/mounting recommendations, a pre-install checklist, maintenance & care info and the manufacturer warranty.

Features:

  • Heats approximately 120 sq. ft.
  • 26,000 BTU's
  • Full Stainless Steel Construction
  • Wind resistant to 8 mph
  • Automatic "Smart" Re-Ignition
  • Liquid Propane (LP) or Natural Gas (NG)
  • One year manufacturer's warranty
  • Surface ceiling/wall adjustable mount included
  • Water/Splash Resistant

At A Glance

  • Assembly Requiredassembly required
  • Natural Gasnatural gas heating fuel
  • Liquid Propaneliquid propane heating fuel

Product Protection

The heaters are constructed using stainless steel and high temperature coated paint to help ensure maximum life in the outdoor environment. To maximize the life of the heater it is important that frequent cleaning is performed and appropriate care is taken. Control compartment, burner and circulation air passageways of the heater must be kept clean. Inspect and clean at least every six months or more frequently in adverse conditions.

Bromic recommends the following:
Always install with the corresponding Bromic heat shield and clean according to Bromic instructions. Clean the heater weekly during regular use and at least monthly when not in use. In a salt-air environment, such as near the ocean, cleaning is recommended more frequently. Heaters must not be cleaned with cleaning products that are combustible or corrosive. Over prolonged use may cause slight discoloration of painted surfaces. This is normal and does not effect the operation of the appliance. Bromic uses specialized high temperature paints and as such re-painting should not be attempted. Replacement parts can be purchased to restore the heater to its original appearance from Bromic Pty Ltd. (Refer to parts list in Bromic Manual).

Servicing
Bromic outdoor radiant heaters require regular servicing to maintain efficient operation. The heaters are used on a cyclical basis however are exposed to the external elements continuously (both during periods of use and whilst remaining idle). Regular servicing is therefore required to ensure trouble free operation. All maintenance should be carried out ONLY by authorized service personnel. Servicing is recommended at the commencement of each winter season and more frequently in adverse conditions. Please refer to the Bromic Manual for the standard Bromic servicing instructions.