Fire Pit Art Fire Surfer Fire Pit
ITEM #: FIRE-FS-WB
For a Free Design Consultation or to Order by Phone
Fire Pit Art Fire Surfer Fire Pit
Ships within 1 - 2 weeks
- Crafted in the USA of heavy duty ¼ in. thick mild carbon steel
- Fire pit is numbered by the artist on an attached brass plaque
- Fire pit can be left outside in all weather conditions
The Fire Pit Art Fire Surfer Fire Pit offers a sleek, modern profile for your patio or outdoor deck. Its Zen-like appearance offers a full view of the fire show from any height or angle. Fire Pit Art crafts this fire pit to order and each unit is numbered by the artisan. Made in the US, Fire Surfer outdoor fire pits are fabricated of 1/8" 304 stainless steel. This all-season unit is equipped with a rain drain.
Available as a 30" fire bowl in a 1/8" 304 stainless steel.
You do not need to do anything to the carbon steel to maintain it's finish. If you would like to smooth out the weathered surfaces, you can use a Scotch Brite pad to gently rub the steel. This will cause some of the rust barrier to break off and fall to the ground. Be sure to thoroughly clean the ground surface after this process. You can use water to clean the surfaces after this process.
Do not get water into any of the burner components. Water in the burner components can cause dangerous back pressure. If you think there is water in the burner components, call a licensed technician to check the burner before use.
Fire Pit with Gas Option
Fire pits should be inspected before initial use and inspected and cleaned at least annually by a qualified field service person. Periodically remove the logs, glass or lava rock and examine the burner. If dirty, clean with a soft brush. Also, examine the area around the Propane/Air Mixer. Any dirt or lint in this area should be removed. This will ensure long life and trouble free operation. When the fire pit is put back in service, check the burner flame patterns; it is imperative that the burner flame characteristics are steady, not lifting or floating. Periodically check the hose connecting the LP gas cylinder to ensure it is not damaged in any way. While the fire pit is not in use, it should be covered to protect it from weather and other adverse elements. Not protecting the fire pit could result in a void of the warranty.
Carbon (soot) may build up on the surfaces of the logs with heavy use. This is more likely to occur when using LP gas. The soot should be cleaned off the surface of the logs periodically to prevent excessive buildup. To clean the logs, be sure the fire is out, the gas supply is turned off and the logs are cool to the touch. The soot can then be brushed off with a dry bristle brush or cloth. Logs can be damaged if mishandled. Dispose of soot and cleaning materials properly. Keep away from clothing, pets and outdoor furniture.
- Width: 30"
- Height: 12"
- Weight (lbs.): 50
Assembly: No assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.
If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.
Fabric Swatch Request
Click to select the desired swatches. Once you have made your selection, click the green button below and proceed through check-out. You will not be charged. Five swatches per order. To request more, please call our showroom at 1-866-350-8325.