Colors may vary based on differences in monitors, lighting, dye lots, and fibers. If you’re shopping for fabrics, order swatches to most accurately view colors. Order up to 3 premium swatches for $10, credited toward your next purchase. Select images may have been digitally enhanced.
Return Policy
One or more components of this product are final sale, non-returnable, and cannot be canceled. Learn more ›Lead Time
White Glove Delivery Available
How does it work?How can we help?
Contact us for assistance, a free design consultation or to order by phone.
Recommended Add-ons
About the Kingsley Bate Tivoli 4-Piece Curved Outdoor Sectional Set
Highlights
- Main image shown with Sunbrella Grade A Canvas fabric and Stainless Steel frame
- Sectional is fully customizable. Inquire for design assistance
- 304-grade stainless steel topped with a thick outdoor cushion
- Not recommended for salt air environments without electropolishing
- Electropolish finish recommended for salt air environments is SOLD OUT
At A Glance
- Covered by the Kingsley Bate warranty
- No Assembly Required
- Ships from USA
- cushion included
- Made in Indonesia
- authenticity guarantee
- Authorized Kingsley Bate Dealer
Description
Craftsmanship and contemporary design are hallmarks of the Kingsley Bate Tivoli 4-Piece Outdoor Sectional Set. Constructed of 304-grade stainless steel with Grade A teak accents that add a touch of elegance, this striking outdoor lounging set provides cushioned comfort and a modern aesthetic that family, friends and guest will appreciate. The sturdy frames have a Batyline sling bottom deck that combines with thick Sunbrella covered cushions for optimal comfort.
Set as shown includes: (2) Curved Corner Chairs and (2) Curved Ottomans. Please call our showroom to order a custom configuration that fits your space.
NOTE: Stainless steel furniture that will be exposed to salt air or chlorinated water should be electropolished (special order) or waxed. Electropolishing will provide additional protection against corrosion and discoloration. When this process is applied to stainless steel, it gives a mirror-like appearance instead of a matte or brushed finish. Additional lead time and upcharges apply for this option. Regular maintenance is still required to preserve the electropolish finish. Metal should be wiped down and cleaned from the surface regularly to avoid corrosion. Electropolished steel furniture is not recommended for use around an indoor chlorinated pool.
Over 40 solution-dyed acrylic fabrics are available for the all-weather seating cushion. Customer's Own Material (COM) accepted.
Note - using a patterned or textured fabric on a sectional is not recommended due to potential different pattern directions on adjacent or complementary pieces within the same collection.
Review the Kingsley Bate Catalog for the complete Kingsley Bate outdoor furnishings and accessories. Questions regarding furniture cleaning and tips can be found in the Kingsley Bate Care and Maintenance Sheet. All questions related to warranty information can be answered by reviewing the Kingsley Bate Warranty.
Why Choose Kingsley Bate?
Since 1983, American-owned company Kingsley Bate has produced premium-quality, long-lasting patio furniture.
A pioneer in the outdoor furniture market, Kingsley Bate was the first American company to use Javanese teak—sourced from the island of Java in Indonesia—in the manufacturing of its furniture. In 1983, Kingsley Bate—with the Indonesian government and its people—developed a teak furniture program in Java, ensuring that teak could be sustainably harvested without detriment to the country’s natural resources. This legacy continues today, as Kingsley Bate’s teak furniture is crafted only with premium-quality, sustainably harvested Indonesian teak and precise mortise and tenon joinery.
Though the brand’s reputation was founded on teak, its furniture designs have since expanded to incorporate the finest stainless steel, eco-Teak™, and all-weather wicker—plus protective covers and replacement cushions, slings, and parts. This combination of quality material and craftsmanship provides exterior furnishings of exceptional style and durability.
AuthenTEAK is proudly one of the largest Kingsley Bate retailers in the country, offering a wide selection of Kingsley Bate products—including one of the most comprehensive selections of Kingsley Bate protective covers and replacement cushions, slings, and parts. Not only does AuthenTEAK offer these products at the best and most up-to-date lead times, with a large Quick Ship inventory (products on their way to you within one business day), but we also have Kingsley Bate products on display in our 15,000-square-foot Atlanta showroom, so you can experience them in person and ask our team questions before making a purchase. AuthenTEAK also offers curated Kingsley Bate sets available online, making it easy to create a beautiful, fully designed outdoor living space.
Product Protection
Winter Care
Kingsley Bate recommends that furniture with stainless steel accents be stored for the winter in climates exposed to snow and freezing temperatures. Furniture must be stored in an upright position to allow for proper water drainage. Storing furniture upside-down may cause water to accumulate and freeze inside the frame, causing structural damage. Always thoroughly clean your furniture before placing in storage. The best place to store your furniture is a dry garage, garden shed, or basement.
Cleaning Stainless Steel
The recommended method for cleaning depends on the type of finish:
For the Standard Stainless Steel Finish:
Using fresh water, rinse the frame thoroughly at a high hose pressure. Be careful to avoid any teak details on the furniture as the high pressure can erode the surface of the timber.
For more thorough cleaning, wash the stainless steel with mild detergent and warm water using a soft cloth or sponge. Always wipe with the directional grain of the steel, not across it. After washing, rinse with fresh water and dry thoroughly.
For finger prints or smudges, you may wish to use a stainless steel cleaner. Always read the manufacturer's instructions carefully before applying a stainless steel cleaning product. For more stubborn cleaning or brown surface spots, follow the instructions above, replacing the cloth or sponge with a fine grit non-metallic abrasive pad such as Scotch-Brite. Never use abrasive cleaners, steel wool pads, highly abrasive cloths, or an industrial pressure washer.
For the Electropolished Standard Stainless Steel Finish:
Using fresh water, rinse the frame thoroughly at a high hose pressure. Be careful to avoid any teak details on the furniture as the high pressure can erode the surface of the timber.
For more thorough cleaning, wash the stainless steel with mild detergent and warm water using a soft cloth or sponge. After washing, rinse with fresh water and dry thoroughly.
For finger prints, smudges, or brown surface spots, you may wish to use a stainless steel cleaner. Always read the manufacturer's instructions carefully before applying a cleaning product. Do not use any pads, brushes or abrasive materials on the electropolished surface. Extra care should be used to avoid scratching the finish, as doing so can make the steel more susceptible to corrosion.
Cleaning Cushions
Kingsley Bate cushions are made with either Sunbrella or Outdura fabrics, a 100% solution-dyed acrylic. The fabric should be cleaned regularly before environmental deposits such as dirt, etc., are allowed to accumulate and become embedded.
Kingsley Bate strongly recommends that you do not remove the fill from your cushions when cleaning the cushion fabric. Instead, clean the cushions with the fill in place. Most cushions are 'stuffed' using specialized machinery, and it is not always possible to re-stuff the cushions by hand and achieve a professional, finished appearance.
To clean the fabric, simply brush off any loose dirt, and then clean briskly with a sponge using fresh water and a mild natural soap (Woolite is acceptable). Water temperature should be no more than 100 degree F (37 degree C), as acrylic fiber is heat sensitive at high temperatures. Do not subject the fabric to excessive heat as it will shrink. Do not steam press, iron, or dry in electric or gas dryers.
Sunbrella and Outdura Fabrics are treated with a fluorocarbon finish that acts as a sealant, making it resistant to water and stains. If you use liquid detergent instead of a natural soap to clean your cushions, it may be necessary to reapply the water repellent treatment to the fabric. We recommend using 303 Hi Tech Fabric Guard or a similar product.
If your cushion becomes saturated with water, unzip the cushion and stand it on its edge in a dry, sunny location. The zipper-side should be facing down to allow the water to drain through the opening. Cushions will typically dry in 24-48 hours depending on the level of saturation and the weather conditions during the drying process.
When cushions are not being used, you may also wish to stand them on edge within the furniture frame. Doing so will reduce the surface area exposed to the rain and allow for faster drying.
Avoid putting the fabric in direct contact with oil-based products, which may cause the fabric to age more rapidly. If direct contact with an oil-based product occurs, clean the fabric promptly.
Furniture Covers
Furniture covers should be cleaned regularly before environmental deposits (dirt, etc.) are allowed to accumulate and become embedded in the fabric. We recommend spot cleaning furniture covers. Start by brushing off any loose dirt/debris, then clean using a sponge, fresh water, and mild soap.
Kingsley Bate recommends that furniture with stainless steel accents be stored for the winter in climates exposed to snow and freezing temperatures. Furniture must be stored in an upright position to allow for proper water drainage. Storing furniture upside-down may cause water to accumulate and freeze inside the frame, causing structural damage. Always thoroughly clean your furniture before placing in storage. The best place to store your furniture is a dry garage, garden shed, or basement.
Cleaning Stainless Steel
The recommended method for cleaning depends on the type of finish:
For the Standard Stainless Steel Finish:
Using fresh water, rinse the frame thoroughly at a high hose pressure. Be careful to avoid any teak details on the furniture as the high pressure can erode the surface of the timber.
For more thorough cleaning, wash the stainless steel with mild detergent and warm water using a soft cloth or sponge. Always wipe with the directional grain of the steel, not across it. After washing, rinse with fresh water and dry thoroughly.
For finger prints or smudges, you may wish to use a stainless steel cleaner. Always read the manufacturer's instructions carefully before applying a stainless steel cleaning product. For more stubborn cleaning or brown surface spots, follow the instructions above, replacing the cloth or sponge with a fine grit non-metallic abrasive pad such as Scotch-Brite. Never use abrasive cleaners, steel wool pads, highly abrasive cloths, or an industrial pressure washer.
For the Electropolished Standard Stainless Steel Finish:
Using fresh water, rinse the frame thoroughly at a high hose pressure. Be careful to avoid any teak details on the furniture as the high pressure can erode the surface of the timber.
For more thorough cleaning, wash the stainless steel with mild detergent and warm water using a soft cloth or sponge. After washing, rinse with fresh water and dry thoroughly.
For finger prints, smudges, or brown surface spots, you may wish to use a stainless steel cleaner. Always read the manufacturer's instructions carefully before applying a cleaning product. Do not use any pads, brushes or abrasive materials on the electropolished surface. Extra care should be used to avoid scratching the finish, as doing so can make the steel more susceptible to corrosion.
Cleaning Cushions
Kingsley Bate cushions are made with either Sunbrella or Outdura fabrics, a 100% solution-dyed acrylic. The fabric should be cleaned regularly before environmental deposits such as dirt, etc., are allowed to accumulate and become embedded.
Kingsley Bate strongly recommends that you do not remove the fill from your cushions when cleaning the cushion fabric. Instead, clean the cushions with the fill in place. Most cushions are 'stuffed' using specialized machinery, and it is not always possible to re-stuff the cushions by hand and achieve a professional, finished appearance.
To clean the fabric, simply brush off any loose dirt, and then clean briskly with a sponge using fresh water and a mild natural soap (Woolite is acceptable). Water temperature should be no more than 100 degree F (37 degree C), as acrylic fiber is heat sensitive at high temperatures. Do not subject the fabric to excessive heat as it will shrink. Do not steam press, iron, or dry in electric or gas dryers.
Sunbrella and Outdura Fabrics are treated with a fluorocarbon finish that acts as a sealant, making it resistant to water and stains. If you use liquid detergent instead of a natural soap to clean your cushions, it may be necessary to reapply the water repellent treatment to the fabric. We recommend using 303 Hi Tech Fabric Guard or a similar product.
If your cushion becomes saturated with water, unzip the cushion and stand it on its edge in a dry, sunny location. The zipper-side should be facing down to allow the water to drain through the opening. Cushions will typically dry in 24-48 hours depending on the level of saturation and the weather conditions during the drying process.
When cushions are not being used, you may also wish to stand them on edge within the furniture frame. Doing so will reduce the surface area exposed to the rain and allow for faster drying.
Avoid putting the fabric in direct contact with oil-based products, which may cause the fabric to age more rapidly. If direct contact with an oil-based product occurs, clean the fabric promptly.
Furniture Covers
Furniture covers should be cleaned regularly before environmental deposits (dirt, etc.) are allowed to accumulate and become embedded in the fabric. We recommend spot cleaning furniture covers. Start by brushing off any loose dirt/debris, then clean using a sponge, fresh water, and mild soap.
Warranty
LIMITED WARRANTY
Kingsley Bate furniture comes with a limited warranty against manufacturer’s defects. Standard warranty periods for each category of furniture are provided below. For complete details on our warranty or to inquire about service, please call our Customer Service department at (703) 361-7000 or email teak@kingsleybate.com.
TEAK FURNITURE (GRADE A WOOD)
5 year warranty against structural failure of frame for residential applications
3 year warranty against structural failure of frame for commercial applications
TEAK FURNITURE (DISTRESSED WOOD)
5 year warranty against structural failure of frame for residential applications
3 year warranty against structural failure of frame for commercial applications
1 year warranty against peeling, cracking, or blistering of finish on galvanized steel table tops
STAINLESS STEEL FURNITURE
3 year warranty against structural failure of frame for residential or commercial applications
WOVEN FURNITURE
3 year warranty against structural failure of frame for residential or commercial applications
1 year warranty for glass table tops
ALUMINUM FURNITURE
5 year warranty against structural failure of frame for residential or commercial applications
3 year warranty against cracking, peeling or blistering of finish
UMBRELLAS/BASES
1 year umbrella warranty against structural failure of frame for residential or commercial applications (wind damage not covered)
1 year umbrella base warranty for residential or commercial applications (corrosion not covered)
CUSHIONS, SLINGS, PILLOWS, FURNITURE COVERS
1 year warranty against defects in material (except C.O.M) or workmanship for residential or commercial applications (teak oil stains not covered)
WHAT'S NOT COVERED UNDER WARRANTY
This warranty does not cover and is void if damage is a result of freight/shipping, a failure caused by unreasonable or abusive use, acts of God, improper care, freeze damage, mildew, normal wear, fading and stretching of fabrics, glass breakage, glides, repairs or modifications to product after purchase, or if the customer fails to provide reasonable and necessary care and maintenance as outlined in instructions.
Teak wood is a natural material. As such, you may notice checking (small cracks), teak oil secretions, and lifting of the grain as the wood weathers outdoors. These are normal occurrences and are not covered by warranty.
Distressed teak furniture is prized for its unique character. Nicks, splits, cracks, knots, and other imperfections in the wood are an inherent part of the furniture design. Finishes are hand applied and some slight color variation is normal. By its nature, distressed teak wood planks may be somewhat uneven and may cup or bow over time due to changes in temperature, or humidity. We believe this only enriches the furniture's distressed appeal and is not covered by warranty.
Product Set Specifications
Pieces included in this set
Ratings & Reviews
Do you own this product? Be the first to rate it.
Your feedback will help customers like you make informed decisions and will help us to improve our product offerings!
If you have any questions regarding the customer service you received, please contact us.
