- Cooking Surface: 420 sq. in. (Primary), Width: 54.6 in., Depth: 23.4 in., Height: 48.1 in., Weight (lbs.): 124 lbs
- Includes two folding side shelves
- 25,5000 BTUs, heats to 600 degrees in 11 minutes
Shopping for a Client?
Unlock your trade benefits
Covered by the Saber Grills warranty.
Contact us for assistance, a free design consultation or to order by phone.
SABER grills use a patented cooking system to deliver infrared heat while only using 30% less fuel every time you grill. This advanced proprietary system directs airflow away from the cooking surface, locking in the food's natural moisture and producing juicier results. SABER grills are certified to the highest safety standards in the market ensuring safety and reliability, and the stainless steel used to product SABER grills is guaranteed to be 304 commercial-grade.
The Saber Grills Select 3-Burner Infrared Gas Grill has 420 square inches of cooking surface and folding side shelves for added space. It has true zonal cooking with three stainless steel burners that can be used singly, in pairs or all three at once. The three individual temperature gauges, strategically located at surface level, will let you know the amount of heat in each zone. The grill has two internal halogen lights, tool holders and a towel bar to keep your utensils close by. IR cooking allows you to grill without flare ups with even temperature distribution over the entire cooking area. The cart has concealed storage behind two stainless steel doors and four locking caster wheels for ease of movement around your patio. The Saber Select 3 Burner grill is a Liquid Propane grill and can be converted for use with Natural Gas by purchasing the Natural Gas conversion kit.
Please note that there are separate conversion kits for the 2017 or newer grill models, and for the 2016 or older grill models. If unsure about your grill model number, please contact us for assistance.
More information regarding grill features and construction can be answered in the Saber Catalog. For questions about assembly, installation and care please review the Assembly Guide and Product Guide. Saber also provides an excellent Grilling Guide complete with expert tips, tricks and recipes.
How do I routinely clean my grill?
Here are a few tips for keeping your grill working at peak performance:
After each use, turn the grill to HI and close the lid to burn off any food debris that remains on the grates. After about 15 minutes, the debris will turn to ash that can be easily removed with the Saber grate cleaning tool once the grill cools.
Follow up with a light coat of high-heat cooking oil to maintain the seasoning on the grates and protect the cooking surface.
Periodically remove the grates from the grill and clean the underlying emitter plates with a brush to remove debris.
To maintain your grill’s appearance, wash with mild detergent and warm water, or use a stainless steel grill polish. For a selection of grilling tools, including cooking and cleaning products, visit www.sabergrills.com.
Regularly inspect the burner tubes to ensure that there are no insects or blockages. Refer to your product guide for complete information.
If an LP cylinder is connected to the grill, store outdoors in a well ventilated space that is out of reach of children.
Do not mistake brown or black accumulation of grease and smoke for paint or porcelain. Apply a strong solution of detergent and water or use a grill cleaner with scrub brush on insides of grill lid and bottom. Rinse and allow to completely dry.
Do not apply a caustic grill/oven cleaner to painted surfaces.
Plastic parts: wash with warm soapy water and wipe dry. Do not use citrisol, abrasive cleaners, degreasers or a concentrated grill cleaner on plastic parts. Damage to and failure of parts can result.
Porcelain surfaces: because of glass-like composition, most residue can be wiped away with baking soda/water solution or specially formulated cleaner. Use non-abrasive scouring powder on stubborn stains.
Painted surfaces: wash with mild detergent or non-abrasive cleaner and warm soapy water. Wipe dry with a soft non-abrasive cloth.
Stainless steel surfaces: to maintain your grill’s high quality appearance, wash with mild detergent and warm soapy water and wipe dry with a soft cloth after each use. Baked-on grease deposits may require the use of a cleaning pad. Use only in direction of brushed finish to avoid damage. Do not use an abrasive cleaning pad on areas with graphics.
Cooking surfaces: if a bristle brush is used to clean and of the grill cooking surfaces, ensure no loose bristles remain on cooking surfaces prior to grilling. It is not recommended to clean cooking surfaces while the grill is hot. Remove cooking debris with the SABER Grate Cleaning Tool included with your grill.
Storing your grill
Clean cooking grates.
Store in dry place.
When LP cylinder is connected to grill, store outdoors in a well ventilated space and out of reach of children.
Cover grill if stored outdoors. Choose from a cover offered by the manufacturer.
Store grill indoors only if LP cylinder is turned off and disconnected, removed from grill and stored outdoors.
When removing grill from storage, follow “Cleaning the Burner Assembly” instructions before starting grill.
Cleaning the Burner Assembly
Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill.
1. Turn gas OFF at control knobs and LP cylinder or Natural Gas supply line.
2. Remover cooking grates and emitters.
3. Remover carryover tubes.
4. Detach electrode from burner with a flat blade screwdriver.
5. Carefully lift each burner up and away from valve openings.
a. We suggest three ways to clean the burner tubes. Use the one easiest for you.
i. Bend a stiff wire (a light weight coat hanger works well) into a small hook. Run the hook through each burner several times.
ii. Use a narrow bottle brush with a flexible handle (do not use a brass wire brush), run the brush through each burner tuber several times. iii. Wear eye protection: use and air hose to force air into the burner tube and out the burner ports. Check each port to make sure air comes out
Limited Lifetime Warranty
Saber warrants the fabricated stainless steel components (lids, lid inserts, exterior fire box and cart panels), to be free from defects in material and workmanship under normal residential use for the lifetime of the product. Saber's Limited Lifetime Warranty covers the structural integrity of the lids, lid inserts, exterior firebox and cart panels. Should structural deterioration occur to the degree of non performance, the part(s) will be replaced, free of change to the consumer for installation. Costs associated with the installation of replacement warranty parts is not covered by this limited lifetime warranty and is the sole responsibility of the owner. This warranty excludes discoloration, surface scratches, weather and atmospheric related staining, and minor surface rust and oxidation which are normal conditions and to be expected with any outdoor product.
Ten Year Limited Warranty:
Saber warrants the stainless steel burner tubes and carryover tubes to be free from defects in materials and workmanship under normal residential use for a period of ten (10) years from the original date of purchase. The part will be replaced, free of charge.
Five Year Limited Warranty:
Saber warrants the stainless steel cooking grates, emitters, warming racks, and porcelain enameled warming racks, grates, and burner boxes to be free from defects in materials and workmanship under normal residential use for a period of five (5) years from the original date of purchase. The part will be replaced free of charge.
Two Year Limited Warranty:
Saber warrants all painted parts and any other parts not specifically mentioned above, to be free from defects in materials and workmanship under normal residential use for a period of two (2) years from the original date of purchase. Saber will replace the part which fails or is found to be defective during the warranty period, at no cost to the original purchaser.
Owner shall be responsible for proper installation, providing normal care and maintenance, and providing proof of purchase upon request. Saber reserves the right, PRIOR to shipping warranty replacement parts, to require the part in question be returned for inspection and analysis. Requested parts should be returned to Saber, freight pre-paid by the consumer. For additional warranty info visit Saber Support or call 888-947-2237.
Do you own this product? Be the first to rate it.
Your feedback will help customers like you make informed decisions and will help us to improve our product offerings!
If you have any questions regarding the customer service you received, please contact us.
Lets Make it (Email) Official
Become an AuthenTEAK Insider and be first to know about new collections, exclusive sales, and special offers.