Kingsley Bate Carmel Settee Replacement Cushion

by Kingsley Bate

These replacement cushions are made by Kingsley Bate and are constructed to fit the Kingsley Bate Carmel Settee (Item #CM58). These comfortable all-weather cushions are filled with either urethane foam wrapped with polyester fiber or with blow-filled polyester fiber. All cushions are available with Sunbrella Fabrics. Cushions are sewn with a lock-stitch sewing method for superior seam strength and tear resistance. Color coordinated zippers are standard. Replacement cushions are made-to-order and all sales are final. For assistance determining the correct cushion, please contact our showroom.

These Kingsley Bate outdoor replacement cushions come standard with (2) Box Edge seats each measuring 29.5"W x 26.5"D x 3.5"H and (3) Knife Edge backs each measuring 25"W x 20"D x 6"H. All dimensions are close approximates. Please note that fill variation, seam allowances and measurement style may affect the final measurements.

Review the Kingsley Bate Catalog for the complete Kingsley Bate outdoor furnishings and accessories. Questions regarding furniture cleaning and tips can be found in the Kingsley Bate Care and Maintenance Sheet. All questions related to warranty information can be answered by reviewing the Kingsley Bate Warranty.

Kingsley Bate Catalog
Kingsley Bate Care and Maintenance
Kingsley Bate Warranty

Cleaning Woven Furniture
To clean your woven furniture, rinse the frame with fresh water using a high hose pressure. Be careful to avoid any teak details on the furniture as the high pressure can erode the surface of the timber. Optionally, you may wash the woven material with mild detergent and warm water using a soft brush. After washing, rinse with fresh water until there are no soap bubbles remaining. Allow the furniture to air-dry. If using a specialty outdoor furniture cleaner, avoid using a foaming product, as foam cleaners can leave residue in the gaps of the weaving and later attract dirt. For additional details please review the Kingsley Bate Care and Maintenance FAQs Sheet.

Winter Care
Kingsley Bate recommends that woven furniture be stored for the winter in climates exposed to snow and freezing temperatures. Furniture must be stored in an upright position to allow for proper water drainage. Storing furniture upside-down may cause water to accumulate and freeze inside the frame, causing structural damage. Always thoroughly clean your furniture before placing in storage. The best place to store your furniture is a dry garage, garden shed, or basement. You may also store your woven furniture outdoors using breathable furniture covers.

Cushions should be stored for the winter in climates exposed to snow and freezing temperatures. Cushions should be cleaned and allowed to air dry before placing into storage. Always store cushions in a dry, well ventilated area.

Cleaning Cushions
Kingsley Bate cushions are made with either Sunbrella or Outdura fabrics, a 100% solution-dyed acrylic. The fabric should be cleaned regularly before environmental deposits such as dirt, etc., are allowed to accumulate and become embedded.

Kingsley Bate strongly recommends that you do not remove the fill from your cushions when cleaning the cushion fabric. Instead, clean the cushions with the fill in place. Most cushions are 'stuffed' using specialized machinery, and it is not always possible to re-stuff the cushions by hand and achieve a professional, finished appearance.

To clean the fabric, simply brush off any loose dirt, and then clean briskly with a sponge using fresh water and a mild natural soap (Woolite is acceptable). Water temperature should be no more than 100 degree F (37 degree C), as acrylic fiber is heat sensitive at high temperatures. Do not subject the fabric to excessive heat as it will shrink. Do not steam press, iron, or dry in electric or gas dryers.

Sunbrella and Outdura Fabrics are treated with a fluorocarbon finish that acts as a sealant, making it resistant to water and stains. If you use liquid detergent instead of a natural soap to clean your cushions, it may be necessary to reapply the water repellent treatment to the fabric. We recommend using 303 Hi Tech Fabric Guard or a similar product.

If your cushion becomes saturated with water, unzip the cushion and stand it on its edge in a dry, sunny location. The zipper-side should be facing down to allow the water to drain through the opening. Cushions will typically dry in 24-48 hours depending on the level of saturation and the weather conditions during the drying process.

When cushions are not being used, you may also wish to stand them on edge within the furniture frame. Doing so will reduce the surface area exposed to the rain and allow for faster drying.

Avoid putting the fabric in direct contact with oil-based products, which may cause the fabric to age more rapidly. If direct contact with an oil-based product occurs, clean the fabric promptly.

Furniture Covers
Furniture covers should be cleaned regularly before environmental deposits (dirt, etc.) are allowed to accumulate and become embedded in the fabric. We recommend spot cleaning furniture covers. Start by brushing off any loose dirt/debris, then clean using a sponge, fresh water, and mild soap.

Cushion Dimensions

• Each Seat: 29.5"W x 26.5"D x 3.5"H
• Each Back: 25"W x 20"D x 6"H

Made specifically tailored to fit this size furniture frame

• Seat Height: 18"
• Width: 66"
• Depth: 35.5"
• Height: 37.5"
• Weight (lbs.): 73

Shipping Method: Freight (for freight terms and services click Shipping Info)
Assembly: No assembly required
Additional Info: Orders ship complete unless otherwise requested. Ordering more than one item may affect shipping method.

If you have questions about our Return Policy, require expedited services or are interested in White Glove Delivery, please contact our design experts toll free at 866-350-8325 or via email with our Contact Form.